SP10-57C-0-N-12DR/Z SOLENOID VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce SP10-57C-0-N-12DR/Z (5022042) is a highly versatile and robust proportional solenoid valve, designed for precise control in hydraulic systems. This direct-acting, 3-position, 5-port valve features a closed center spool configuration with port 1 serving as a load sense port. It is engineered as a screw-in cartridge type suitable for use with general-purpose hydraulic fluids. The valve is notable for its continuous-duty rated solenoid and boasts a hardened precision spool and cage that ensure long service life even under demanding conditions. This model offers optional coil voltages and terminations to accommodate diverse operational requirements, along with manual override options enhancing its flexibility in application. Notably, it includes optional waterproof E-Coils that are rated up to IP69K, providing exceptional protection against ingress of dust and high-temperature, high-pressure water jets. The cartridges of this model are voltage interchangeable which simplifies maintenance and upgrades. Performance-wise, the SP10-57C-0-N-12DR/Z supports a maximum flow rate of 22.7 liters per minute at 250 bar (3625 psi) pressure rating. It demonstrates excellent efficiency with maximum internal leakage maintained at 246 ml/min at 207 bar (3000 psi). The operating fluid temperature range is quite broad, from -40 to +100 degrees Celsius (-40 to +212 degrees Fahrenheit) with Buna N seals, ensuring reliable operation across various environmental conditions. For installation, this valve utilizes the industry-common cavity VC105 and adheres to straightforward torque specifications for cartridge installation (32.5 to 35.3 Nm). Its compact design weighing approximately 0.30 kg facilitates easy integration into existing systems without orientation restrictions. With available accessories like seal kits and housings specific to the SP10 series, users can easily maintain or configure the valve to meet specific system requirements.