SV10-21-8T-N-115AP SOLENOID VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce SV10-21-8T-N-115AP (5021675) is a solenoid-operated, 2-way, piloted, poppet-type hydraulic cartridge valve designed primarily for low leakage in load-holding applications. This normally open valve allows fluid flow from port 2 to port 1 when de-energized and restricts flow in the opposite direction. Upon energization, the poppet closes firmly against its seat to block flow from port 2 to port 1, enabling controlled operation as the cartridge permits flow from port 1 to port 2 after overcoming a solenoid force of 50 to 150 psi (3.4 to 10.3 bar). Key features of this model include a continuous-duty rated coil and a hardened seat that ensures durability and minimal leakage over time. The SV10-21-8T-N-115AP is equipped with optional coil voltages and terminations, efficient wet-armature construction, and cartridges that are voltage interchangeable. It also boasts a unitized, molded coil design with a manual override option and optional waterproof E-Coils rated up to IP69K. The valve has robust performance ratings including a maximum operating pressure of 207 bar (3000 psi), proof pressure of up to 344 bar (5000 psi), and burst pressures reaching up to 779 bar (11300 psi). It supports flows up to 102 lpm (27 gpm) at a delta pressure of 34.4 bar (500 psi), ensuring effective operation across various hydraulic systems. Designed for versatility in application within hydraulic circuits requiring reliable load holding or modulating functions, this model offers compatibility with mineral-based or synthetic hydraulic fluids with lubricating properties across varied viscosity ranges from 7.4 to 420 cSt. The SV10-21-8T-N-115AP operates effectively within fluid temperatures ranging from -40°C (-40°F) with Buna N seals up to +204°C (+400°F) with fluorocarbon seals, accommodating diverse environmental conditions without compromise on performance.