SV10-23-8T-N-12DL/W SOLENOID VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce SV10-23-8T-N-12DL/W (5021620) is a solenoid-operated, 2-way, piloted, poppet-type hydraulic cartridge valve, designed primarily for low leakage in load-holding applications. This normally open valve facilitates bi-directional flow from port 2 to port 1 when de-energized. Upon energization, the valve’s poppet closes to block the flow from port 2 to port 1 while allowing free reverse flow from port 1 to port 2 after overcoming the solenoid force which operates between 50 to 150 psi (3.4 to 10.3 bar). It features a continuous-duty rated coil and a hardened seat that ensures long life and minimal leakage. The SV10-23 is equipped with efficient wet-armature construction and its cartridges are voltage interchangeable with optional coil voltages and terminations available. The unitized, molded coil design enhances durability and reliability, with an optional manual override feature for added operational flexibility. Additionally, it offers optional waterproof E-Coils that are rated up to IP69K for superior environmental protection. This model is engineered for use within a wide range of temperatures; operating fluid temperatures range from -40°C to +100°C (-40°F to +212°F) with Buna N seals and up to +204°C (400°F) with fluorocarbon seals. It is suitable for mineral-based or synthetic hydraulic fluids with lubricating properties within a viscosity range of 7.4 to 420 cSt. The Hydraforce SV10-23-8T-N-12DL/W provides robust performance specifications including a pressure rating of up to 207 bar (3000 psi), proof pressure of up to 344 bar (5000 psi), and burst pressure reaching up to 779 bar (11300 psi). The cartridge itself weighs approximately 0.16 kg (0.35 lb), ensuring a lightweight yet powerful component suitable for various hydraulic systems without orientation restrictions during installation.