SV10-21-0-V-12EY/Z SOLENOID VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce 5021287 (5021287) is a solenoid-operated, 2-way, piloted, poppet-type, normally open, screw-in hydraulic cartridge valve specifically designed for low leakage in load-holding applications. This valve functions by allowing flow from port 2 to port 1 when de-energized; however, flow from port 1 to port 2 is significantly restricted under these conditions. Upon energization, the valve's poppet closes against its seat to block flow from port 2 to port 1. To allow flow in the opposite direction (from port 1 to port 2), a pressure of between 50 to 150 psi (3.4 to 10.3 bar) is required to overcome the solenoid force. Key features of this model include a continuous-duty rated coil and a hardened seat that ensures both longevity and minimal leakage. The valve offers optional coil voltages and terminations, adapting to various operational needs. Its efficient wet-armature construction enhances performance while interchangeable voltage cartridges add flexibility. The unitized, molded coil design contributes to its robust configuration with a manual override option available for enhanced control. For environments requiring robust protection against dust and water ingress, there are optional waterproof E-Coils rated up to IP69K. Additionally, the Hydraforce 5021287 utilizes an industry common cavity which facilitates standardization and interchangeability across different systems using similar components.