SV10-21-0-N-12ER/Z W/7004426 NUT

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce 5021116 (5021116) is a solenoid-operated, 2-way, piloted, poppet-type, normally open, screw-in hydraulic cartridge valve that excels in low leakage load-holding applications. This valve operates by allowing flow from port 2 to port 1 when de-energized; however, flow from port 1 to port 2 is greatly restricted in this state. Upon energization, the valve's poppet closes against its seat effectively blocking the flow from port 2 to port 1. To enable flow from port 1 to port 2 when the valve is energized, a pressure of between 50 to 150 psi (3.4 to 10.3 bar) is required to overcome the solenoid force. The design features of the Hydraforce 5021116 include a continuous-duty rated coil and a hardened seat which ensure long life and minimal leakage. The efficient wet-armature construction along with voltage interchangeable cartridges add versatility and ease of use in various hydraulic setups. Additionally, this model offers optional coil voltages and terminations to suit different operational requirements. The unitized, molded coil design enhances durability and reliability. Further enhancing its utility are options like manual override and waterproof E-Coils that are rated up to IP69K for high-level protection against ingress of dust and water under severe conditions. The Hydraforce 5021116 uses an industry common cavity which makes it compatible with standard configurations for ease of integration into existing systems or new installations where precise control of hydraulic flow is critical.