SV10-22-8T-N-24ER SOLENOID VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce SV10-22-8T-N-24ER (5020654) is a solenoid-operated, 2-way, normally closed, poppet-type, screw-in hydraulic cartridge valve designed for low leakage blocking and load holding applications. This valve features a standard SV10-22 configuration and includes manual override options. It operates by allowing flow from port 1 to port 2 when de-energized, acting as a check valve and blocking flow from port 2 to port 1. Upon energization, the poppet lifts to open the flow path from port 2 to port 1 while continuing to allow flow from port 1 to port 2. Key features of the SV10-22-8T-N-24ER include a continuous-duty rated coil and a hardened seat that ensures long life and minimal leakage. The valve offers optional coil voltages and terminations, efficient wet-armature construction, voltage interchangeable cartridges, unitized molded coil design, and manual override capabilities. Additionally, it can be equipped with optional waterproof E-Coils rated up to IP69K. The valve is designed for use with mineral-based or synthetic hydraulic fluids with lubricating properties within a viscosity range of 7.4 to 420 cSt. It operates effectively within an ambient temperature range of -40°C to +71°C (-40°F to +160°F), depending on the seal material used—options include Buna N seals for temperatures from -40°C to +100°C (-40°F to +212°F), fluorocarbon seals for -26°C to +204°C (-15°F to +400°F), and polyurethane seals for -54°C to +107°C (-65°F to +225°F). The Hydraforce SV10-22-8T-N-24ER is suitable for various hydraulic systems requiring reliable performance under varying pressure conditions, with pressure ratings up to 241 bar (3500 psi) operational pressure and higher proof pressures available depending on specific configurations.