SV10-P23A-0-N-24DG-M3 SOLENOID VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce 5020534 (5020534) is a solenoid-operated, 2-port, normally open, poppet-type, screw-in hydraulic cartridge valve. It is specifically designed to function as a load-holding or blocking valve in various applications where low internal leakage is critical. The operation of this valve is straightforward: when de-energized, the SV10P23A allows fluid flow from port 2 to port 1 and vice versa. Upon energization, the valve closes to block flow from port 2 to port 1, while allowing flow from port 1 to port 2 after overcoming the solenoid force. This model features an integral position sensor that provides real-time feedback on the valve's status, ensuring precise control and enhanced operational safety. The continuous-duty rated coil makes it suitable for prolonged use without the risk of overheating or failure. The hardened seat within the valve enhances its durability and contributes to maintaining low leakage over its service life. Additionally, it offers optional coil voltages and terminations to accommodate varying system requirements. The efficient wet-armature construction of the Hydraforce 5020534 enhances its reliability and performance under different conditions. Cartridges are designed to be voltage interchangeable which provides flexibility in usage across different systems with varying power supplies. Moreover, its waterproof E-Coils are rated up to IP69K, ensuring protection against ingress of dust and high-temperature pressure wash downs. The unitized, molded coil design along with a 960-hour salt-spray rated solenoid tubes and coils further attest to its robustness and suitability for harsh environments. This combination of features makes the Hydraforce 5020534 an essential component in hydraulic systems requiring precise flow control and minimal leakage.