SV10-P21AK-0-N-0-M3 SOLENOID VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce 5020526 (5020526) is a solenoid-operated, 2-port, normally open, poppet-type, screw-in hydraulic cartridge valve. It is designed primarily to function as a load-holding or blocking valve in systems where low internal leakage is critical. In its default state when de-energized, the SV10P21AX configuration allows fluid flow from port 2 to port 1, while severely restricting flow in the opposite direction. Once energized, the valve shifts to close off flow from port 2 to port 1; however, flow from port 1 to port 2 becomes possible after overcoming the solenoid force. This model features an integral position sensor that provides feedback on whether the valve has shifted positions, enhancing control and operational reliability. It boasts a continuous-duty rated coil and a hardened seat that ensures long life and minimal leakage, key aspects for maintaining efficiency in hydraulic systems. The efficient wet-armature construction supports optimal performance even under demanding conditions. Moreover, the Hydraforce 5020526 offers optional coil voltages and terminations to accommodate diverse system requirements. Its cartridges are voltage interchangeable which facilitates easy maintenance and replacement. The unit's waterproof E-Coils are rated up to IP69K, ensuring protection against ingress of dust and high-temperature high-pressure water jets. Additionally, both solenoid tubes and coils are designed to withstand a 960-hour salt spray test, underscoring their durability in corrosive environments. The molded coil design further unitizes the structure for robustness and reliability in various applications.