SV10-20-6T-N-115AP SOLENOID VALVE
Manufacturer: Hydraforce
Material #: 5020475
Model : SV10-20-6T-N-115AP SOLENOID VALVE
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce SV10-20-6T-N-115AP (5020475) is a solenoid-operated, 2-way, normally closed, poppet-type hydraulic cartridge valve. This screw-in valve features a robust design with a standard SV10-20 configuration and manual override options. It functions as a blocking or load-holding device suitable for low-flow circuits that require pull-only manual override for handles or cable linkage. In its default state when deenergized, the SV10-20-6T-N-115AP acts as a check valve allowing fluid flow from port 1 to port 2 while blocking the opposite direction. Upon energization, the valve’s poppet lifts to enable flow from port 2 to port 1, while restricting flow in the reverse direction.
This model is equipped with a continuous-duty rated coil and a hardened seat ensuring long life and minimal leakage. It supports various optional coil voltages and terminations and boasts an efficient wet-armature construction. The cartridges are voltage interchangeable with unitized, molded coil designs enhancing durability and performance reliability. Additional features include optional waterproof E-Coils rated up to IP69K for superior environmental protection and an industry common cavity for broad compatibility.
With pressure ratings up to 207 bar (3000 psi) and proof pressure of 345 bar (5000 psi), along with burst pressure capabilities reaching 896 bar (13000 psi), this valve ensures robust performance under demanding conditions. It accommodates mineral-based or synthetic hydraulic fluids within a viscosity range of 7.4 to 420 cSt and operates effectively across various temperature ranges depending on seal material—making it versatile for different operational environments.
$131.50 USD
Availability: Backordered
Ships from US
Qty:
Delivered as early as November 18, 2026
| Ratings: | Pressure Ratings Pressure rating: 207 bar (3000 psi) Proof pressure: 345 bar (5000 psi) (sv10-20) Burst pressure: 896 bar (13000 psi) (sv10-20) Flow Ratings Flow rating: See performance graph Maximum internal leakage: 3 drops/min At (sv10-20 and sv10-20m) 207 bar (3000 psi) 3 drops/min At (sv10-20j/y) 207 bar (3000 psi) Temperature Ratings Operating fluid temperature: -40 to 100 °C (-40 to 212 °F) With buna N seals -26 to 204 °C (-15 to 400 °F) With fluorocarbon seals -54 to 107 °C (-65 to 225 °F) With polyurethane seals Storage temperature: -40 to 70 °C (-40 to 160 °F) Ambient temperature: -40 to 70 °C (-40 to 160 °F) Other Ratings Corrosion protection: 960 hr salt spray per ASTM b117 (gsv10-20x) |
| Operating Parameters: | Fluids:
Mineral based or synthetic hydraulic fluid with lubricating properties Fluid viscosity range: 7.4 to 420 cSt Maximum operating contamination level: 20/18/14 per ISO 4406 |
| Performance: |  |
| Installation Specifications: | Cavity:
VC10-2 10-size-2-way Cavities Cartridge installation torque: 32.5 to 35.3 N-m (24 to 26 ft-lb) Coil nut torque: 6.8 to 9.5 N-m (5 to 7 ft-lb) Orientation restriction: None |
| Order Code: |  |
| Optional Position Sensor: | Seal kit:
SK10-2X-T (x = N (x = n, V and P seal option) Seal kit installation instructions Housings: Available 10-2w valve bodies Coils: 10 size D coils 10 size E coils |
