SV10-20-0-N-24EY SOLENOID VALVE
Manufacturer: Hydraforce
Material #: 5020122
Model : SV10-20-0-N-24EY SOLENOID VALVE
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce 5020122 (5020122) is a solenoid-operated, 2-way, normally closed, poppet-type, screw-in hydraulic cartridge valve. It features a standard SV1020 and manual override MO options. This valve is designed primarily as a blocking or load-holding device suitable for low flow circuits that require pull-only manual override for handles or cable linkage. In its default state when de-energized, the SV1020X functions like a check valve, permitting fluid flow from port 1 to port 2 while preventing it in the opposite direction. Upon activation, the valve's poppet lifts to allow flow from port 2 to port 1 while severely restricting the reverse flow.
Key features of this model include a continuous-duty rated coil and a hardened seat that ensures long life and minimal leakage. It offers optional coil voltages and terminations to accommodate different system requirements. The efficient wet-armature construction of the valve enhances its performance while its cartridges are voltage interchangeable which adds to its versatility. The unitized, molded coil design contributes to its robustness.
Additional options for this model include a manual override and waterproof E-Coils that are rated up to IP69K, enhancing its utility in diverse environments. It also fits an industry-common cavity and provides an option for integrating a position sensor, expanding its applicative possibilities across various hydraulic systems needing precise control over fluid handling under different operational conditions.
$70.25 USD
Availability: Backordered
Ships from US
Qty:
Delivered as early as November 24, 2026
| Ratings: | Pressure Ratings Pressure rating: 207 bar (3000 psi) Proof pressure: 345 bar (5000 psi) (sv10-20) Burst pressure: 896 bar (13000 psi) (sv10-20) Flow Ratings Flow rating: See performance graph Maximum internal leakage: 3 drops/min At (sv10-20 and sv10-20m) 207 bar (3000 psi) 3 drops/min At (sv10-20j/y) 207 bar (3000 psi) Temperature Ratings Operating fluid temperature: -40 to 100 °C (-40 to 212 °F) With buna N seals -26 to 204 °C (-15 to 400 °F) With fluorocarbon seals -54 to 107 °C (-65 to 225 °F) With polyurethane seals Storage temperature: -40 to 70 °C (-40 to 160 °F) Ambient temperature: -40 to 70 °C (-40 to 160 °F) Other Ratings Corrosion protection: 960 hr salt spray per ASTM b117 (gsv10-20x) |
| Operating Parameters: | Fluids:
Mineral based or synthetic hydraulic fluid with lubricating properties Fluid viscosity range: 7.4 to 420 cSt Maximum operating contamination level: 20/18/14 per ISO 4406 |
| Performance: |  |
| Installation Specifications: | Cavity:
VC10-2 10-size-2-way Cavities Cartridge installation torque: 32.5 to 35.3 N-m (24 to 26 ft-lb) Coil nut torque: 6.8 to 9.5 N-m (5 to 7 ft-lb) Orientation restriction: None |
| Order Code: |  |
| Optional Position Sensor: | Seal kit:
SK10-2X-T (x = N (x = n, V and P seal option) Seal kit installation instructions Housings: Available 10-2w valve bodies Coils: 10 size D coils 10 size E coils |
