SV10-22-0-N-24AP W/ 7004406 NUT

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce 5020044 (5020044) is a solenoid-operated, 2-way, normally closed, poppet-type screw-in hydraulic cartridge valve designed for precise fluid control in hydraulic systems. This model features a standard SV1022 configuration along with a manual override (MO) option, enhancing its versatility and usability in various applications. It functions primarily to ensure low leakage blocking and load holding, making it suitable for operations requiring reliable performance under conditions where fluid escape must be minimized. Operationally, the 5020044 acts as a check valve when de-energized, permitting flow from port 1 to port 2 while preventing backflow from port 2 to port 1. Upon energization, the valve's poppet lifts to allow bi-directional flow between ports 1 and 2. This dual-mode operation is critical for applications that require both isolation and throughput control of the fluid. Key features of this model include a continuous-duty rated coil and a hardened seat that guarantees extended life and minimal leakage. The valve is designed with efficient wet-armature construction and offers optional coil voltages and terminations to accommodate different electrical requirements. The cartridges are voltage interchangeable which provides flexibility for system upgrades or modifications without complete valve replacement. Furthermore, the unitized, molded coil design contributes to the robustness of the valve, while the optional waterproof E-Coils are rated up to IP69K, ensuring protection against ingress of dust and high-temperature high-pressure water jets. This feature makes it suitable for use in harsh environmental conditions. Additionally, its industry common cavity design allows for easy installation and compatibility with existing hydraulic systems.