SV10-20-0-N-12DL W/ 7004406 NUT
Manufacturer: Hydraforce
Material #: 5020012
Model : SV10-20-0-N-12DL W/ 7004406 NUT
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce SV10-20-0-N-12DL (5020012) is a solenoid-operated, 2-way, normally closed, poppet-type hydraulic cartridge valve designed for use in low flow hydraulic systems. It functions primarily as a blocking or load-holding device and is equipped with a manual override feature that accommodates pull-only requirements for cable linkage or handles. The valve operates by allowing fluid flow from port 1 to port 2 when de-energized, acting as a check valve. When energized, the poppet lifts to open the flow from port 2 to port 1 while significantly restricting flow in the opposite direction.
This model boasts several robust features including a continuous-duty rated coil and a hardened seat that ensures long life and minimal leakage. It offers flexibility with optional coil voltages and terminations, efficient wet-armature construction, interchangeable voltage cartridges, and a unitized molded coil design. For environments requiring higher protection levels against moisture and dust, waterproof E-Coils rated up to IP69K are available.
Hydraforce's SV10-20-0-N-12DL fits industry common cavity VC10-2 and can be used with various seal materials such as Buna N, fluorocarbon, polyurethane, or PPDI urethane depending on temperature requirements of the application. The valve is capable of handling operating pressures up to 207 bar (3000 psi), with proof pressure at 345 bar (5000 psi) and burst pressure reaching up to 896 bar (13000 psi). Optional accessories include position sensors enhancing functionality in complex hydraulic systems.
This valve's robust design makes it suitable for diverse applications where reliable hydraulic control is essential under varying environmental conditions and system demands.
$68.75 USD
Availability: Backordered
Ships from US
Qty:
Delivered as early as October 20, 2026
| Ratings: | Pressure Ratings Pressure rating: 207 bar (3000 psi) Proof pressure: 345 bar (5000 psi) (sv10-20) Burst pressure: 896 bar (13000 psi) (sv10-20) Flow Ratings Flow rating: See performance graph Maximum internal leakage: 3 drops/min At (sv10-20 and sv10-20m) 207 bar (3000 psi) 3 drops/min At (sv10-20j/y) 207 bar (3000 psi) Temperature Ratings Operating fluid temperature: -40 to 100 °C (-40 to 212 °F) With buna N seals -26 to 204 °C (-15 to 400 °F) With fluorocarbon seals -54 to 107 °C (-65 to 225 °F) With polyurethane seals Storage temperature: -40 to 70 °C (-40 to 160 °F) Ambient temperature: -40 to 70 °C (-40 to 160 °F) Other Ratings Corrosion protection: 960 hr salt spray per ASTM b117 (gsv10-20x) |
| Operating Parameters: | Fluids:
Mineral based or synthetic hydraulic fluid with lubricating properties Fluid viscosity range: 7.4 to 420 cSt Maximum operating contamination level: 20/18/14 per ISO 4406 |
| Performance: |  |
| Installation Specifications: | Cavity:
VC10-2 10-size-2-way Cavities Cartridge installation torque: 32.5 to 35.3 N-m (24 to 26 ft-lb) Coil nut torque: 6.8 to 9.5 N-m (5 to 7 ft-lb) Orientation restriction: None |
| Order Code: |  |
| Optional Position Sensor: | Seal kit:
SK10-2X-T (x = N (x = n, V and P seal option) Seal kit installation instructions Housings: Available 10-2w valve bodies Coils: 10 size D coils 10 size E coils |
