SV08-30-6T-N-115AP SOLENOID VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce SV08-30-6T-N-115AP (5006675) is a high-performance, solenoid-operated, 3-port, direct-acting, spool-type hydraulic directional valve designed for compact and efficient hydraulic system management. This screw-in valve is engineered for precision and durability with a hardened spool and cage that ensure long service life even under demanding conditions. The SV08-30 operates by allowing flow from port 2 to port 1 when deenergized, blocking flow at port 3. When energized, it shifts to open flow from port 3 to port 2 while blocking port 1, which should not be used as the inlet despite being able to be fully pressurized. This unit features a continuous-duty rated coil and offers options for different coil voltages and terminations to suit various operational requirements. The efficient wet-armature construction enhances its performance while the unitized, molded coil design contributes to its robustness. An optional manual override provides additional control flexibility. For environments requiring rigorous standards, there are optional waterproof E-Coils rated up to IP69K available. The valve fits an industry-common cavity (VC083) and can be used with either mineral-based or synthetic hydraulic fluids with lubricating properties within a viscosity range of 7.4 to 420 cSt. It operates effectively within a temperature range of -40°C to +100°C with Buna N seals and can handle pressures up to 207 bar (3000 psi). The maximum internal leakage is minimal, ensuring efficient operation - only up to 82 ml/min when deenergized at full pressure, and up to 164 ml/min when energized. For installation ease, the cartridge requires an installation torque of between 25.8 to 28.5 Nm and there are no orientation restrictions which simplifies system design considerations. Accessories such as seal kits and housings are also available for this model, enhancing its adaptability across various applications.