SV38-38K-0-N-00 SOLENOID VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce SV38-38K-0-N-00 (5003060) is a precision-engineered solenoid-operated, 2 position, 3-way, bidirectional blocking screw-in hydraulic cartridge valve. This device is specifically designed for low leakage in load-holding applications, making it highly suitable for tasks requiring precise control over fluid handling and movement within hydraulic systems. The valve operates such that when de-energized, it blocks flow from port 3 to port 2 or vice versa, and when energized, it blocks flow from port 2 to port 1 or vice versa. Key features of the SV38-38K-0-N-00 include a continuous-duty rated coil and a hardened seat that ensures long life and minimal leakage. The valve also offers optional coil voltages and terminations to accommodate different electrical requirements. Its efficient wet-armature construction along with interchangeable voltage cartridges enhances its versatility in various hydraulic setups. Additionally, the unitized, molded coil design contributes to its robustness and reliability in demanding environments. For enhanced durability against environmental conditions, optional waterproof E-Coils are available which are rated up to IP69K. These coils ensure that the valve operates effectively even in high-moisture scenarios. The SV38-38K-0-N-00 also fits industry-common cavity VC08/3way Cavities for ease of installation. In terms of technical specifications, the valve handles a maximum pressure rating of 207 bar (3000 psi) and operates within a fluid temperature range of -40°C to +100°C with Buna N seals, offering flexibility across various operational temperatures with different seal options. It supports mineral-based or synthetic hydraulic fluids with lubricating properties within a viscosity range of 7.4 to 420 cSt. This valve is designed to maintain maximum internal leakage at minimal levels (approximately 0.25 ml/min at 207 bar), ensuring efficiency and preventing fluid loss during operation.