SV38-38-0-N-12ER SOLENOID VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce SV38-38-0-N-12ER (5002976) is a high-performance solenoid-operated cartridge valve that offers versatile flow control in hydraulic systems. This 2-position, 3-way, normally closed valve is specifically designed for bidirectional blocking to maintain low leakage in load-holding applications. When de-energized, it blocks flow between port 3 and port 2 or vice versa, ensuring stable system conditions. Upon energization, the valve shifts to block flow from port 2 to port 1 or the reverse, allowing for controlled operation across various phases of system use. Engineered with a continuous-duty rated coil and a hardened seat, the SV38-38-0-N-12ER ensures durability and minimal leakage over its lifespan. It supports various coil voltages and terminations to cater to different electrical requirements and is constructed with efficient wet-armature construction. The cartridges are voltage interchangeable which adds flexibility in maintenance and setup. Additionally, the unitized, molded coil design enhances reliability while optional waterproof E-Coils are available for demanding environments up to IP69K. This valve operates effectively within a fluid temperature range of -40°C to +100°C with Buna N seals and can handle pressures up to 3000 psi (207 bar). Its design accommodates mineral-based or synthetic hydraulic fluids with lubricating properties within a viscosity range of 7.4 to 420 cSt. Maximum internal leakage does not exceed 0.25 ml/min at maximum pressure, ensuring efficient performance. For installation, the SV38-38-0-N-12ER uses an industry common cavity VC083 and can be installed without orientation restrictions. The robust design specifications make it suitable for varied industrial applications requiring precise hydraulic flow control under rigorous conditions.