SF08-20M-0-P-12DG SOLENOID VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce SF08-20M-0-P-12DG (5000803) is a solenoid-operated, 2-way, normally closed, piloted poppet-type, screw-in hydraulic cartridge valve designed primarily for blocking or load-holding in low flow hydraulic circuits. Its operation hinges on its dual-mode functionality: when de-energized, it acts as a check valve allowing fluid to flow from port 1 to port 2 while blocking the reverse flow; when energized, it opens the pathway from port 2 to port 1 but restricts flow in the opposite direction. This valve is notable for its continuous-duty rated coil and hardened seat which ensure durability and minimal leakage over time. Key features include optional coil voltages and terminations, voltage interchangeable cartridges, and a unitized molded coil design. It also offers optional waterproof E-Coils that are rated up to IP69K for enhanced protection against ingress of dust and high-temperature, high-pressure water. Additionally, this model boasts corrosion-resistant plating effective up to 960 hours of salt spray per ASTM B117 standards. Designed with an industry-common cavity and compact size, the SF08-20M-0-P-12DG facilitates ease of installation and compatibility across various applications. Performance-wise, it supports a pressure rating up to 350 bar (5000 psi), with proof pressure at 483 bar (7000 psi) and burst pressure reaching up to 965 bar (14000 psi). The operating temperatures range from -40°C to +100°C with Buna N seals, and even wider with other seal materials. This makes it suitable for diverse operational environments. The cartridge's maximum internal leakage does not exceed three drops per minute at maximum pressure settings, ensuring efficient performance. This model's adaptability is further enhanced by its compatibility with both mineral-based and synthetic hydraulic fluids within a broad viscosity range of 7.4 to 420 cSt.