SF08-20-0-P-24DG SOLENOID VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce SF08-20-0-P-24DG (5000071) is a solenoid-operated, 2-way, normally closed, piloted poppet-type screw-in hydraulic cartridge valve designed for use as a blocking or load-holding device in low flow circuits. This valve functions as a check valve when de-energized, permitting fluid flow from port 1 to port 2 and blocking the reverse flow. Upon energization, the poppet lifts to allow flow from port 2 to port 1, while restricting flow in the opposite direction. This model features a continuous-duty rated coil and a hardened seat which ensures long life and minimal leakage. The SF08-20-0-P-24DG is equipped with optional coil voltages and terminations, making the cartridges voltage interchangeable. It also boasts a unitized, molded coil design and optional waterproof E-Coils that are rated up to IP69K. The valve benefits from corrosion-resistant plating capable of withstanding 960 hours of salt spray per ASTM B117 standards. Designed for compactness, it fits an industry-common cavity (VC082) and supports various hydraulic fluids including mineral-based or synthetic types with lubricating properties. This model can handle a maximum operating pressure of 350 bar (5000 psi), with proof pressure at 483 bar (7000 psi) and burst pressure reaching up to 965 bar (14000 psi). It operates efficiently within a temperature range of -40°C to +100°C (-40°F to +212°F) with Buna N seals. Additional specifications include an internal wetted surface area of approximately 80 cm² (12.47 in²), making it suitable for diverse hydraulic applications without orientation restrictions during installation. The cartridge weighs about 0.1 kg (0.22 lb), combining robust performance with lightweight design for optimal functionality in various hydraulic systems.