SERVOMOTOR MS2N04-B0BTN-CSSK1-NNNNN-NN

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth MS2N04-B0BTN-CSSK1-NNNNN-NN (R911388438) is a state-of-the-art synchronous motor designed for dynamic and energy-efficient applications. This self-cooling motor is part of the MSN series, which is renowned for combining high dynamics with compact dimensions, ensuring an optimal balance between performance and size. The MS2N04-B0BTN-CSSK1-NNNNN-NN motor features rotors with low inertia, enabling rapid acceleration and deceleration, suitable for applications requiring high precision and responsiveness. With a continuous torque range from 0.5 to 54 Nm and capable of achieving maximum torques up to 354 Nm, this motor can handle a wide array of demands. The rotor inertia without brake value stands at 0.007 kgm², indicating its suitability for tasks that require quick movement without excessive energy consumption. It also provides an International Protection code of IP65, ensuring durability in various environments by offering protection against dust ingress and low-pressure water jets. The motor's shaft comes with an adjustment spring and shaft seal, designed to maintain the integrity of internal components while allowing for flexibility in operation. It includes a holding brake of size 22, which is essential for safety and precision in stopping the motor under load or during power failure. The flange size is 140 mm with a bolt circle diameter of 110 mm. Equipped with selfcooling capabilities, the Bosch Rexroth MS2N04-B0BTN-CSSK1-NNNNN-NN does not require external cooling systems, making it easier to integrate into existing setups without additional equipment. Its maximum speed reaches up to 9,000 rpm, allowing for fast operation cycles that can significantly increase throughput in various applications. The unit has a shaft diameter of 19 mm and weighs approximately 6.8 kg, making it relatively easy to handle during installation or maintenance procedures. Its versatility is further enhanced by its compatibility with the ctrlX configurator from Bosch Rexroth, allowing users to customize their setups efficiently according to specific requirements.