SERVOMOTOR MS2N03-D0BYN-CMSH0-NNNNE-NN

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth MS2N03-D0BYN-CMSH0-NNNNE-NN (R911384772) is a state-of-the-art synchronous servo motor renowned for its high dynamics, compact size, and superior energy efficiency. This self-cooling motor is designed to meet the demands of intelligent solutions within the industry environment by serving as a reliable data source. The MS2N03-D0BYN-CMSH0-NNNNE-NN motor is part of a product range that offers rotors with low and medium inertia, ensuring optimal mass customization for various applications. This particular model boasts impressive specifications, including a continuous torque range from 0.5 to 3.8 Nm and a maximum torque capability of 14.7 Nm, making it suitable for tasks requiring precise motion control and significant power. The motor features a mounting hole pattern of M5, a shaft length that provides adequate connection to drive systems, and it comes without a holding brake, which simplifies integration into existing setups. The flange size for this model is 70mm with a bolt circle diameter of 82mm. Its cooling type relies on self-cooling or natural convection, ensuring sustained performance without the need for additional cooling mechanisms. With an international protection code of IP65, the MS2N03-D0BYN-CMSH0-NNNNE-NN is well-protected against dust ingress and low-pressure water jets from any direction. The rotor inertia without brake value stands at 1.9 kg·cm² while featuring a smooth shaft without a shaft seal for straightforward coupling with other components. The maximum speed achievable by this motor reaches up to 6000 rpm, highlighting its capacity for high-speed operations. Additional features include an integrated spigot diameter of 50mm for precise mounting and compatibility with ctrlX configurator tools for easy setup and configuration. The overall weight of the unit is approximately 2.1 kg which facilitates handling during installation or maintenance procedures.