SERVOMOTOR MS2N07-D0BNA-BMVG2-NNNNN-NN

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth MS2N07-D0BNA-BMVG2-NNNNN-NN (R911384541) is a state-of-the-art synchronous servo motor designed for dynamic and precise motion control applications. This motor is part of the MS2N series, distinguished by its high dynamics, compact dimensions, and superior energy efficiency. The MS2N07-D0BNA-BMVG2-NNNNN-NN features a low-inertia rotor, making it ideal for applications requiring rapid acceleration and deceleration. With continuous torque capabilities ranging from 0.5 to 360 Nm and a maximum torque of 4.8 Nm, this servo motor is versatile enough to handle a broad spectrum of operational demands. It is equipped with an external axial fan for forced ventilation, ensuring optimal performance even under strenuous conditions. The motor boasts an IP65 international protection code, signifying dust tightness and protection against water jets, which allows for its use in various environmental conditions without compromising functionality or lifespan. Its smooth shaft with shaft seal further enhances its robustness. For ease of integration into complex systems, the MS2N07-D0BNA-BMVG2-NNNNN-NN includes intelligent features that allow it to act as a data source within Industry 4.0 environments. The motor also offers explosion-proof versions that comply with ATEX regulations for use in potentially hazardous atmospheres. Mounting the motor is facilitated by an M6 mounting hole and a flange size of 70 mm with a bolt circle diameter of 110 mm. The shaft length is standardized at 20 mm with a diameter of 19 mm. With or without the holding brake option, this model provides flexibility according to application requirements. In terms of physical specifications, the motor's rotor inertia without brake value stands at 3.1 kgcm², while the version with brake has an inertia value of 3.5 kgcm². The entire unit weighs approximately 5 kg. For customization and planning purposes, Bosch Rexroth offers tools such as the ctrlX configurator and EPLAN data portal to assist in selecting the right configuration for specific applications.