PROPORTIONAL DIRECTIONAL VALVE 4WRKE27W8-500L-3X/6EG24EK31/F1D3M
Manufacturer: Bosch Rexroth
Material #: R901097952
Model : 4WRKE27W8-500L-3X/6EG24EK31/F1D3M
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth 4WRKE27W8-500L-3X/6EG24EK31/F1D3M (R901097952) is a high-performance industrial hydraulic valve designed for reliable control of oil flow direction, characterized by its linear spool valve and pilot operation with internal pilot oil supply and external return. This valve is equipped with a size W spool symbol and can withstand a maximum pressure, providing robust functionality for demanding applications. It features an electrical connection with a connector pole PE according to EN standards and offers subplate mounting conforming to NFPA T..R D Size CETOP D and ISO standards.
The unit showcases an electrical type of actuation with integrated electronics, ensuring precise control over the hydraulic system. It supports an analog connectivity with a command value input range of 4-20 mA, suitable for handling various hydraulic fluids including HL, HLP, HLPD, HVLP, HVLPD, and HFC. The valve’s nominal flow rate complements its design for optimal fluid dynamics.
This model includes a WRAP W.XG first-stage pilot control valve that utilizes wet-pin DC solenoids in its operation. These solenoids maintain constant force across the control stroke when electric current is applied proportionally. The main stage of the valve is position-controlled to ensure stability regardless of flow size variations.
Additional features include an inductive position transducer for precise feedback on the main control spool's position and integrated control electronics that minimize production deviations. The zero point adjustment ensures accurate factory settings while allowing limited on-site calibration by trained specialists.
This Bosch Rexroth proportional directional valve is engineered for precision in controlling flow direction and magnitude through proportional solenoid operation. Its spring-centered main control spool and comprehensive design make it suitable for advanced hydraulic systems requiring meticulous flow management.
11,090.00
More are expected on August 1, 2025
Status: This product is temporarily out of stock.
Qty: Delivered as early as August 1, 2025 when ordered in
This product is eligible for factory repair.
Size 27, symbol W8, electrical with integrated electronics, 24 V DC
Industrial hydraulic valve in the high performance range; reliable control of the oil flow direction according to the hydraulic symbol; high accuracy through internal piston position feedback
Unpacked Weight: 19.520 kg
Pilot-operated 2-stage proportional directional valves with electrical position feedback of the main control spool and integrated electronics (OBE) Control of flow direction and size Proportional solenoid operation For subplate mounting: Porting pattern according to ISO 4401 Electrical position feedback Spring-centered main control spool Pilot control valve: single-stage proportional directional valve Main stage with position control
Pilot control valve type 4WRAP 6 W7.3X/G24… (1st stage)
The pilot control valve is a direct operated proportional valve. The control edge geometry has been optimized for the use as pilot control valve for proportional directional valves type 4WRKE. The proportional solenoids are pressure-tight, wet-pin DC solenoids with detachable coils. They convert the electric current proportionally into mechanical force. An increase of the current results in a correspondingly higher solenoid force. The set solenoid force will remain constant over the entire control stroke.
The pilot control valve mainly consists of the housing (1), the proportional solenoid (2 and 3), the valve control spool (4) and springs (5 and 6). In non-actuated state both actuators are connected to the tank. If one of the two solenoids (2 or 3) is excited, the magnetic force will move the valve control spool (4) towards the spring (5 or 6). After having overcome the overlap area, the connection of one of the two actuators to the tank is blocked and the connection to the pressure chamber is made. There is a flow from P to the control chamber of the main stage.
Valves of type 4WRKE are 2-stage proportional directional valves. They control the flow direction and size. The main stage is position-controlled so that the control spool position is independent from flow forces also in the case of bigger flows.
The valves mainly consist of the pilot control valve (1), the housing (8), the main control spool (7), the covers (5 and 6), the centering spring (4), the inductive position transducer (9) and the pressure reducing valve (3). If there is no input signal, the main control spool (7) will be kept in the central position by the centering spring (4). Both control chambers in the covers (5 and 6) are connected to the tank via the valve control spool (2). The main control spool (7) is connected to suited control electronics via the inductive position transducer (9). Both the position change of the main control spool (7) and the change of the command value at the junction summing of the amplifier create a voltage difference. During the comparison of command value and actual value, a possible control deviation is determined via the electronics and the proportional solenoid of the pilot control valve (1) is supplied with current. The current induces a force in the solenoid which operates the control spool via a plunger in a row. The flow which is activated via the control cross-sections leads to an adjustment of the main control spool. The main control spool (7) with the core of the inductive position transducer (9) attached to it is displaced until the actual value corresponds to the command value. In controlled state, the main control spool (7) is force-balanced and kept in this controlled position. The control spool stroke and the control opening change proportionally to the command value. The control electronics is integrated in the valve. By adjusting valve and electronics, the deviation in series production of the devices is kept low.
The tank lines must not be allowed to run empty; with corresponding installation conditions, a preload valve (preload pressure approx. 2 bar) must be installed.
Valve particularities
The 2nd stage is basically set-up of modules of our proportional valves. The zero point adjustment at "zero point main stage" is made at the factory and can be adjusted in a range of ± 30% of the nominal stroke via a potentiometer in the control electronics. Access in the integrated control electronics by removing a plug screw on the front side of the cover housing. When the pilot control valve or the control electronics are exchanged, they are to be re-adjusted. All adjustments may be implemented by instructed experts only.
Notice!
Changes in the zero point may result in damage to the system and may only be implemented by instructed specialists!
(measured with HLP46, ϑÖl = 40 ±5 °C)
Control spool E, W, and R
Characteristic curve L
Control spool E, W, and R
Characteristic curve P
Transition function with stepped electric input signals
Size 10
Load function with maximum valve opening; tolerance ±10 %
Size 10
Transition function with stepped electric input signals
Size 16
Load function with maximum valve opening; tolerance ±10 %
Size 16
Transition function with stepped electric input signals
Size 25, Size 27
Load function with maximum valve opening; tolerance ±10 %
Size 25, Size 27
Transition function with stepped electric input signals
Size 32
Load function with maximum valve opening; tolerance ±10 %
Size 32
Transition function with stepped electric input signals
Size 35
Load function with maximum valve opening; tolerance ±10 %
Size 35
Symbols
|
With symbols E1- and W8-, the following applies: |
|
|
P → A: qvmax |
B → T: qv/2 |
|
P → B: qv/2 |
A → T: qvmax |
|
With symbols R and R3-, the following applies: |
|
|
P → A: qvmax |
B → P: qv/2 |
|
P → B: qv/2 |
A → T: qvmax |
|
With control spool symbols W6-, W8- and R3-, there is - in the zero position - a connection from A → T and B → T with approx. 2 % of the relevant nominal cross-section. |
|
simplified
External pilot oil supply, external pilot oil return
Detailed
|
1 |
Pilot control valve |
|
2 |
Main valve |
|
3 |
Pressure reducing valve |
|
4 |
Integrated electronics (OBE) |
|
Pin assignment |
Contact |
Assignment interface "A1" |
Assignment interface "F1" |
Signal with interface A5 |
|
Power supply |
A |
24 V (18 V to 35 V), Imax = 1.5 A; impulse load ≤ 3 A |
||
|
B |
0 V |
|||
|
Reference (actual value) |
C |
Reference potential actual value |
Enable 4 to 24 V |
|
|
Differential amplifier input (command value) |
D |
± 10 V |
4 ... 20 mA |
± 10 V |
|
(command value) |
E |
0V reference potential to pin D |
0 V reference potential for pin D and F |
|
|
Measuring output (actual value) |
F |
± 10 V |
4 ... 20 mA |
± 10 V |
|
PE |
connected to cooling element and valve housing |
|||
Command value:
Positive command value at D and reference potential at E result in flow from P → A and B → T.Negative command value at D and reference potential at E result in flow from P → B and A → T.
Connection cable:
Recommendation:
up to 25 m cable length type LiYCY 7 x 0.75 mm² up to 50 m cable length type LiYCY 7 x 1.0 mm² Connect shield to PE only on the supply side.Notice:
Electrical signals provided via control electronics (e. g. actual value) must not be used for switching off safety-relevant machine functions.
Block diagram / pin assignment
Size 10
Dimensions in mm
|
1 |
Pilot control valve |
|
2 |
Mating connector "A", color gray |
|
3 |
Mating connector "B", color black |
|
4 |
Space required for the connection cable and to remove the mating connector |
|
5 |
Cabling |
|
6 |
Mating connector, separate order |
|
7 |
"D3” pressure reducing valve |
|
8 |
Name plate |
|
9 |
Main valve |
|
10 |
Integrated electronics (OBE) |
|
11 |
Identical seal rings for ports A, B, P, and T |
|
12 |
Identical seal rings for ports X and Y |
|
13 |
Machined valve contact surface; Porting pattern according to ISO 4401-05-05-0-05 |
Recommended valve mounting screws (separate order):
4 hexagon socket head cap screws ISO 4762 - M6 x 45 - 10.9-flZn-240h-LTightening torque MA = 13.5 Nm ± 10 %, material no. R913000258 or
4 hexagon socket head cap screws ISO 4762 - M6 x 45 - 10.9Tightening torque MA = 15.5 Nm ± 10 %
Size 16
Dimensions in mm
|
1 |
Pilot control valve |
|
2 |
Mating connector "A", color gray |
|
3 |
Mating connector "B", color black |
|
4 |
Space required for the connection cable and to remove the mating connector |
|
5 |
Cabling |
|
6 |
Mating connector, separate order |
|
7 |
"D3” pressure reducing valve |
|
8 |
Name plate |
|
9 |
Main valve |
|
10 |
Integrated electronics (OBE) |
|
11 |
Identical seal rings for ports A, B, P, and T |
|
12 |
Identical seal rings for ports X and Y |
|
13 |
Machined valve contact surface; Porting pattern according to ISO 4401-07-07-0-05 |
|
14 |
Locking pin |
Recommended valve mounting screws (separate order):
2 hexagon socket head cap screws ISO 4762 - M6 x 60 - 10.9-flZn-240h-LTightening torque MA = 12.2 Nm ± 10 % , material no. R913000115
4 hexagon socket head cap screws ISO 4762 - M10 x 60 - 10.9-flZn-240h-LTightening torque MA = 58 Nm ± 20 %, material no. R913000116 or
2 hexagon socket head cap screws ISO 4762 - M6 x 60 - 10.9
Tightening torque MA = 15.5 Nm ± 10 %
4 hexagon socket head cap screws ISO 4762 - M10 x 60 - 10.9
Tightening torque MA = 75 Nm ± 20 %
NG25
Dimensions in mm
|
1 |
Pilot control valve |
|
2 |
Mating connector "A", color gray |
|
3 |
Mating connector "B", color black |
|
4 |
Space required for the connection cable and to remove the mating connector |
|
5 |
Cabling |
|
6 |
Mating connector, separate order |
|
7 |
"D3” pressure reducing valve |
|
8 |
Name plate |
|
9 |
Main valve |
|
10 |
Integrated electronics (OBE) |
|
11 |
Identical seal rings for ports A, B, P, and T |
|
12 |
Identical seal rings for ports X and Y |
|
13 |
Machined valve contact surface; Porting pattern according to ISO 4401-08-08-0-05 (ports X and Y as required) |
|
14 |
Locking pin |
NG27
Dimensions in mm
|
1 |
Pilot control valve |
|
2 |
Mating connector "A", color gray |
|
3 |
Mating connector "B", color black |
|
4 |
Space required for the connection cable and to remove the mating connector |
|
5 |
Cabling |
|
6 |
Mating connector, separate order |
|
7 |
"D3” pressure reducing valve |
|
8 |
Name plate |
|
9 |
Main valve |
|
10 |
Integrated electronics (OBE) |
|
11 |
Identical seal rings for ports A, B, P, and T |
|
12 |
Identical seal rings for ports X and Y |
|
13 |
Machined valve contact surface; Porting pattern according to ISO 4401-08-08-0-05 (Ports X, Y as required) |
|
14 |
Locking pin |
Recommended valve mounting screws (separate order):
6 hexagon socket head cap screws ISO 4762 - M12 x 60 - 10.9-flZn-240h-LTightening torque MA = 100 Nm ± 20 %, material no. R913000121 or
6 hexagon socket head cap screws ISO 4762 - M12 x 60 - 10.9Tightening torque MA = 130 Nm ± 20 %
Size 32
Dimensions in mm
|
1 |
Pilot control valve |
|
2 |
Mating connector "A", color gray |
|
3 |
Mating connector "B", color black |
|
4 |
Space required for the connection cable and to remove the mating connector |
|
5 |
Cabling |
|
6 |
Mating connector, separate order |
|
7 |
"D3” pressure reducing valve |
|
8 |
Name plate |
|
9 |
Main valve |
|
10 |
Integrated electronics (OBE) |
|
11 |
Identical seal rings for ports A, B, P, and T |
|
12 |
Identical seal rings for ports X and Y |
|
13 |
Machined valve contact surface; Porting pattern according to ISO 4401-10-09-0-05 (Ports X and Y as required) |
|
14 |
Locking pin |
Recommended valve mounting screws (separate order):
6 hexagon socket head cap screws ISO 4762 - M20 x 80 - 10.9-flZn-240h-LTightening torque MA = 340 Nm ± 20 %, material no. R901035246 or
4 hexagon socket head cap screws ISO 4762 - M20 x 80 - 10.9Tightening torque MA = 430 Nm ± 20 %
Size 35
Dimensions in mm
|
1 |
Pilot control valve |
|
2 |
Mating connector "A", color gray |
|
3 |
Mating connector "B", color black |
|
4 |
Space required for the connection cable and to remove the mating connector |
|
5 |
Cabling |
|
6 |
Mating connector, separate order |
|
7 |
"D3” pressure reducing valve |
|
8 |
Name plate |
|
9 |
Main valve |
|
10 |
Integrated electronics (OBE) |
|
11 |
Identical seal rings for ports A, B, P, and T |
|
12 |
Identical seal rings for ports X and Y |
|
13 |
Machined valve contact surface; Porting pattern according to ISO 4401-10-09-0-05 (Ports X and Y as required) |
|
14 |
Locating pins |
Recommended valve mounting screws (separate order):
6 hexagon socket head cap screws ISO 4762 - M20 x 100 - 10.9-flZn-240h-LTightening torque MA = 465 Nm ± 20 %, material no. R913000386 or
6 hexagon socket head cap screws ISO 4762 - M20 x 100 - 10.9Tightening torque MA = 610 Nm ± 20 %
Mating connectors for valves with round connector, 6-pole + PE
7P Z31
Mating connectors for valves with round connector, 6-pole + PE
7P Z31
For valves with round connector according to EN 175201-804, 6-pole + PE as well as 6-pole, compatible with VG 95328Data sheet
Spare parts & repair
