PRESSURE REDUCING VALVE 3DREP6A-2X/25EG24XEJ/V

Manufacturer: Bosch Rexroth

Material #: R901025332

Model : 3DREP6A-2X/25EG24XEJ/V

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth 3DREP6A-2X/25EG24XEJ/V (R901025332) is a high-performance industrial hydraulic valve designed for reliable pressure reduction to a preset command value signal. This direct-actuated spool valve features an electrical connection with a cable gland and terminal box, ensuring secure and efficient electrical integration. With a pressure adjustment range of up to bar and the ability to manage a maximum flow of l/min, this valve is well-suited for demanding applications requiring precise pressure control. The model is equipped with wet-pin DC solenoids that are controllable via external electronics, translating electrical input signals into proportional pressure output signals. The robust housing accommodates a subplate mounting connection, conforming to NFPA T3.5.1 R2 D03 and ISO 4401 standards, which ensures compatibility with various hydraulic systems. Additionally, the valve supports numerous hydraulic fluids including HL, HLP, HLPD, HVLP, HVLPD, HETG, HEES, HEPG, HFDU, and HFDR. The 3DREP6A-2X/25EG24XEJ/V also boasts compliance with CE directives and the explosion protection directive EU for safe operation in potentially explosive atmospheres. Its design includes a single solenoid for the two-position version or dual solenoids for three-position control—each solenoid influencing the control spool position and thereby regulating the pressure output proportionally to the current supplied. This unit's construction features FKM seals for enhanced durability against harsh fluids and operating conditions. The model's size corresponds to CETOP D03 specifications with a maximum operating pressure of bar. The type of protection offered by this valve is Ex eb mb IIC T4 Gb according to EN IEC standards, making it suitable for areas where explosion protection is paramount. In summary, the Bosch Rexroth 3DREP6A-2X/25EG24XEJ/V (R901025332) stands out as an advanced solution for precise hydraulic pressure management in industrial settings that demand reliability and safety in explosive environments.

$7,992.00 USD

More are expected on May 20, 2025

Add to Cart

Status: This product is temporarily out of stock.

Qty: Delivered as early as May 20, 2025 when ordered in

This product is eligible for factory repair.

Repairs from $1,167.00

PRESSURE REDUCING VALVE 3DREP6A-2X/25EG24XEJ/V

Size 6, P → A / A → T, electrical with external electronics, 24 V DC

Industrial hydraulic valve in a high performance range. Reliable reduction of the pressure to the command value signal.

Unpacked Weight: 2.620 kg

3-way version For intended use in potentially explosive atmosphere For subplate mounting Porting pattern according to ISO 4401-03-02-0-05 (but without locating hole) Wet-pin DC solenoids Solenoid coil is rotatable by 90° Electrical connection as individual connection with cable gland

The 3-way pressure reducing valve type 3 DREP 6.. is direct operated by proportional solenoids. It converts an electrical input signal into a proportional pressure output signal.

The proportional solenoids are controllable wet-pin DC solenoids. The solenoids are controlled by external control electronics.

Set-up:

The valve basically consists of:

Housing (1) with connection surface Control spool (2) with pressure measuring pins (3, 4) Solenoids (5, 6) with central thread

Function:

The pressure in A or B is set by means of the proportional solenoids. The amount of the pressure depends on the current. The amount of the pressure depends on the current. With de-energized solenoids (5, 6), the control spool (2) is held in the central position by means of the compression springs (8). Ports A and B are connected with T so that the hydraulic fluid can flow off to the tank without obstructions. By energization of a proportional solenoid, e. g. solenoid “b" (5), the pressure measuring pin (4) and with it the control spool (2) are moved to the left. This opens the connection from P to A and B to T via orifice-type cross-sections with progressive flow characteristics. With the surface of the pressure measuring pin (3) the pressure that builds up in channel A acts on the control spool and against the solenoid force. The pressure measuring spool (3) is supported by the solenoid "a". If the pressure exceeds the value set at solenoid “b”, the control spool (2) is pushed back against the solenoid force and connects A with T until the set pressure is achieved again. The pressure is proportional to the solenoid current.

When the solenoid is switched off, the control spool (2) is returned into the central position by the compression springs (8).

Notice:

Regarding valves of version 3DREP 6 C, only one solenoid may be actuated at a time.

Type 3DREP 6..2X/..XE..

Notice:

The tank line must not be allowed to run empty. With corresponding installation conditions, a preload valve (preload pressure approx. 2 bar) must be installed.

Valve with two spool positions (type 3DREP..A...):

The function of this valve version basically corresponds to the valve with three spool positions. The 2 spool position valve is, however, only equipped with solenoid "b" (5). Instead of the 2nd proportional solenoid, a plug screw (7) is installed.

Spool valve
Direct actuated
Pressure adjustment range up to 25 bar
Operating pressure, max. 100 bar
Size 6
Volume flow, max. 15 l/min
Type of protection valve:
Area of application in accordance with the Explosion Protection Directive 2014/34/EU: II 2G; II 2D
Component series 2X
Ex h IIC T4 Gb X according to EN 80079-36

Data Sheet	Download Data Sheet
Manual	Download Manual
Manual	Download Manual
Manual	Download Manual
Manual	Download Manual
Manual	Download Manual

Spool symbol	P → A / A → T
Max. pressure	100
Electrical connection description	Cable gland with terminal box
Productgroup ID	9,10,11,12,13,14
Number of ports	4
Type of actuation	Electrical with external electronics
Conformity description	CE – explosion protection directive 2014/34/EU
Size	6
Electrical connector	Cable gland
Max. flow	15
Type of connection	Subplate mounting
Connection diagram NFPA	NFPA T3.5.1 R2-2002 D03
Size_CETOP	D03
Connection diagram	ISO 4401-03-02-0-05
Supply voltage	24 VDC
Number of switching positions	2
Weight	2.620
Seals	FKM
Hydraulic fluid	HL,HLP,HLPD,HVLP,HVLPD,HETG,HEES,HEPG,HFDU,HFDR
Conformity	CE

01	02	03		04		05	06	07	08	09		10	11
3DREP	6		‒	2X	/		E	G24	XE	J	/		*

01	Proportional pressure relief valve in 3-way version	3DREP
02	Size	6
03	Symbols
	Type 3DREP6 A 2X/..	A
	Type 3DREP6 B 2X/..	B
	Type 3DREP6 C 2X/..	C
04	Component series 20 ... 29 (20 ... 29: unchanged installation and connection dimensions) - Size 6	2X
Pressure rating
05	16 bar	16
	25 bar	25
	45 bar	45
06	Proportional solenoid	E
Power supply
07	Direct voltage 24 V	G24
08	“Increased safety” explosion protection; for details, please refer to the information on explosion protection	XE
09	Surface protection
09	Seawater-resistant, galvanized	J
Seal material
10	NBR seals	M
	FKM seals	V
	Observe compatibility of seals with hydraulic fluid used.
11	Further details in the plain text	*

general

Type			3DREP .../..XE
Size			6
Component series			2X
Installation position			any, preferably horizontal
Earth	3DREP6 A/B	kg	2.7
	3DREP6 C	kg	4.4
Storage temperature range		°C	+5 … +40
Maximum storage time 1)		yrs	1
Ambient temperature range		°C	-20 … +60
Surface protection			Galvanized

1)	see operating instructions 29184-XE

hydraulic

Type				3DREP .../..XE
Maximum operating pressure			bar	100
Operating pressure range	Port P	Pressure rating 16 bar	bar	20 … 100
		Pressure rating 25 bar	bar	30 … 100
		Pressure rating 45 bar	bar	50 … 100
	Port T		bar	0 ... 30
Maximum flow P → A or P → B 1)			l/min	15
Hydraulic fluid				see table
Hydraulic fluid temperature range (FKM seals)			°C	-15 … +80
Hydraulic fluid temperature range (NBR seals)			°C	-20 … +80
Viscosity range			mm²/s	20 … 380
	preferably		mm²/s	30 … 46
Maximum admissible degree of contamination of the hydraulic fluid, cleanliness class according to ISO 4406 (c) 2)				Class 17/15/12
Hysteresis			%	≤ 6
Repetition accuracy			%	≤ 2
Response sensitivity			%	≤ 1
Range of inversion			%	≤ 2
Maximum surface temperature			°C	120

1)	Δp = 50 bar; see characteristic curves
2)	The cleanliness classes specified for the components must be adhered to in hydraulic systems. Effective filtration prevents faults and simultaneously increases the life cycle of the components. For the selection of the filters, see www.boschrexroth.com/filter.

Hydraulic fluid		Classification	Suitable sealing materials	Standards	Data sheet
Mineral oils		HL, HLP, HLPD, HVLP, HVLPD	NBR / FKM	DIN 51524	90220
Bio-degradable 1)	Insoluble in water	HETG	FKM	ISO 15380	90221
	Insoluble in water	HEES	FKM	ISO 15380	90221
	Soluble in water	HEPG	FKM	ISO 15380	90222
Flame-resistant 1)	Water-free	HFDU, HFDR	FKM	ISO 12922	90223
Flame-resistant 1)	Containing water	HFC (Fuchs Hydrotherm 46M, Petrofer Ultra Safe 620)	NBR	ISO 12922	90223
Important information on hydraulic fluids: For more information and data on the use of other hydraulicfluids, please refer to the data sheets above or contact us. There may be limitations regarding the technical valve data (temperature, pressure range, life cycle, maintenance intervals, etc.). The ignition temperature of the hydraulic fluid used must be 50 K higher than the maximum surface temperature.
Flame-resistant - containing water: Maximum operating pressure 210 bar Maximum pressure differential per control edge 175 bar Pressure pre-loading at the tank port >20% of the pressure differential, otherwise increased cavitation erosion Life cycle as compared to operation with mineral oil HL, HLP 50 … 100% Maximum hydraulic fluid temperature 50 °C Bio-degradable and flame-resistant: When using hydraulic fluids that are simultaneously zinc-solving, zinc may accumulate.

1)	Not recommended for corrosion-protected version "J"

electrical

Type		3DREP .../..XE
Voltage type		Direct current or pulse-width modulated signal with a pulse voltage ≤ 28 V and a frequency ≥ 160 Hz up to max. 500 Hz
Type of signal		analog
Maximum solenoid current	A	1.03
Duty cycle	%	100
Coil temperature	°C	120

Information on explosion protection

Area of application according to directive 2014/34/EU	II 2G
Type of protection of the valve according to EN 13463-1/ EN 13463-5	c T4 X
Valve solenoid type of protection according to EN 60079-7 / EN 60079-18 1)	Ex e mb IIC T4 Gb
Type examination certificate solenoid	KEMA 02ATEX2240 X
“IECEx Certificate of Conformity” for solenoid	IECEx DEK 12.0068X
Special application conditions for a safe application	– In case of bank assembly, only one solenoid of all valves may be energized at a time. ‒ In case of valves with two solenoids, only one of the solenoids may be energized at a time. ‒ Only direct current or a pulse-width modulated signal with a pulse voltage ≤ 28 V and frequency ≥ 160 Hz up to max. 500 Hz may be used.

1)	Surface temperature > 50 °C, provide contact protection.

Control electronics

Amplifier module for the control of explosion-proof proportional directional valves 4WRA...XE, 3DREP 6...XE and 4WRZ...XE	VT-MSPA2-200-1X/V0/0 according to data sheet 30228-200
Module for monitoring and limiting the solenoid currents with proportional valves	VT-MUXA2-2-1X/V0/1A according to data sheet 30290
Notice: For monitoring the solenoid current, a monitoring circuitry is to be provided. We recommend operating the valves with the assemblies described herein.

(measured with HLP46, ϑOil = 40 ±5 °C)

Pressure ratings 16, 25 and 45 bar

Flow-dependent pressure

Type 3DREP..6 A 2X/..E (detailed)

Type 3DREP..6 B 2X/..E (detailed)

Type 3DREP..6 C 2X/..E (detailed)

The type-examination tested valve solenoid is equipped with a terminal box and a type-tested cable gland. The connection is polarity-independent.

Notice:

Corresponding to the rated current, a fuse according to DIN 41571 and EN / IEC 60127 has to be connected upstream of every valve solenoid (max. 3 x Irated).

The shut-off threshold of the fuse has to match the prospective short-circuit current of the supply source.

The prospective short-circuit current of the supply source may amount to a maximum of 1500 A.

This fuse may only be installed outside the potentially explosive area or must be of an explosion-proof design.

Properties of the connection terminals and mounting elements

Position	Function	Connectable line cross-section
1	Operating voltage connection	Single-wire 0.75 … 2.5 mm2
		Finely stranded,0.75 … 1.5 mm2
2	Connection for protective earthing conductor	Single-wire 2.5 mm2 max.
		Finely stranded, 1.5 mm2 max.
3	Connection for potential equalization conductor	Single-wired, 4 … 6 mm2
		Finely stranded, 4 mm2

Cable gland

Type approval	II 2G Ex e IIC Gb
Threaded connection	M20 x 1,5
Protection class according to DIN EN 60529	IP66 (with correctly installed electrical connection)
Line diameter	7 … 10,5 mm
Sealing	Outer sheath sealing

Connection line

Line type	Non-armored cables and lines (outer sheath sealing)
Temperature range	–30 … > +110 °C

1)	Recommended pre-fusecharacteristics: medium time-lag according to DIN 41571; 1.25 A

Dimensions in mm


Required surface quality of the valve contact surface

1	Valve housing
2	Proportional solenoid "a"
3	Proportional solenoid "b"
4	Terminal box
5	Name plate
6	Identical seal rings for ports A, B, P, and T
7	Plug screw for valve with one solenoid
8	Porting pattern according to ISO 4401-03-02-0-05 (but without locating hole)

Valve mounting screws (separate order):

For reasons of stability, exclusively the following valve mounting screws are to be used:

4 hexagon socket head cap screws

ISO 4762 - M5 x 50 - 10.9-flZn-240h-L

(friction coefficient 0.09 – 0.14 according to VDA 235-101)

Tightening torque MA = 7 Nm ± 10 %,

Material no. R913000064

Subplates (separate order) with porting pattern according to ISO 4401-03-02-0-05, see data sheet 45100.

Notice:

Subplates are no components in the sense of directive 2014/34/EU and can be used after the manufacturer of the overall system has conducted an assessment of the risk of ignition. The "G...J3" versions are free from aluminum and/or magnesium and galvanized.

Installation conditions (dimensions in mm)

	Single assembly	Bank assembly
Subplate dimensions	Minimum dimensions: Length ≥ 64, width ≥ 58, height ≥ 25	Minimum cross-section: Height ≥ 60, width ≥ 85
Thermal conductivity of the subplate (EN-GJS-500-7)	≥ 38 W/mK
Minimum distance between the longitudinal valve axes	≥ 55 mm

Notice:

In case of bank assembly, only one solenoid of all valves may be energized at a time.

Schematic diagram

Dimensions in mm

PRESSURE REDUCING VALVE 3DREP6A-2X/25EG24XEJ/V

Manufacturer: Bosch Rexroth

Material #: R901025332

Model : 3DREP6A-2X/25EG24XEJ/V

More are expected on May 20, 2025

This product is eligible for factory repair.

Set-up:

Function:

Notice:

Type 3DREP 6..2X/..XE..

Notice:

Valve with two spool positions (type 3DREP..A...):

Type 3DREP6 A 2X/..

Type 3DREP6 B 2X/..

Type 3DREP6 C 2X/..

general

hydraulic

electrical

Information on explosion protection

Control electronics

(measured with HLP46, ϑOil = 40 ±5 °C)

Pressure ratings 16, 25 and 45 bar

Pressure ratings 16, 25 and 45 bar

Flow-dependent pressure

Type 3DREP..6 A 2X/..E (detailed)

Type 3DREP..6 B 2X/..E (detailed)

Type 3DREP..6 C 2X/..E (detailed)

Properties of the connection terminals and mounting elements

Cable gland

Connection line

Valve mounting screws (separate order):

Installation conditions (dimensions in mm)

Notice:

Schematic diagram

Related Products

Information

Account