DZ6DP2-5X/25XYV
Manufacturer: Bosch Rexroth
Material #: R900949200
Model : DZ6DP2-5X/25XYV
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth DZ6DP2-5X/25XYV (R900949200) is a direct operated pressure sequence valve designed to facilitate the pressure-dependent connection of a second hydraulic system. This valve operates by utilizing a compression spring to hold the control spool in an initial position, effectively blocking flow. Pressure in channel P is applied against the spool, and once it overcomes the set value of the spring, the spool moves to allow fluid from P to A, engaging the second system without impacting pressure in channel P.
The DZ6DP2-5X/25XYV can receive control signals either internally from channel P or externally via port BX. The choice between internal or external leakage oil discharge is provided through port TY or internally via A, with an important note that internal discharge will affect the set cracking pressure due to additional pressure in channel A. An optional check valve can be integrated for free return flow from A to P.
For monitoring purposes, a pressure gauge connection is available for checking sequencing pressure directly at the valve. The DZ6DP2-5X/25XYV valve comes with several options for subplate mounting and conforms to DIN form A standards without a locating hole as default, or ISO standards with a locating hole if specified.
Additionally, this model offers various adjustment types including a rotary knob, threaded pin with hexagon and protective cap, lockable rotary knob with scale, and rotary knob with scale. The maximum operating pressure for this component is determined by its series X designation and it supports a maximum flow measured in liters per minute (l/min). Subplates are required for mounting but must be ordered separately. The presence of optional features like check valves enhances its adaptability for different hydraulic circuit configurations.
$947.00 USD
More are expected on October 23, 2024
Status: This product is temporarily out of stock.
Qty: Delivered as early as October 23, 2024 when ordered in
This product is eligible for factory repair.
Valve type DZ 6 DP is a direct operated pressure sequence valve. It is applied for pressure-dependent connection of a second system. The sequencing pressure is set via the adjustment type (4).
The compression spring (3) holds the control spool (2) in initial position, the valve is blocked. The pressure in channel P is applied via the control line (6) at the spool face of the control spool (2) opposite the compression spring (3).
If the pressure in channel P reaches the set value of the compression spring (3), the control spool (2) is moved to the left and the connection from P to A is opened. The system connected to channel A is connected without a pressure drop in channel P.
The control signal is received internally via the control line (6) from channel P or externally via port B (X).
Depending on the use of the valve, leakage oil discharge is realized externally via port T (Y) or internally via A.
Attention!
With internal leakage oil discharge, the set cracking pressure is increased by the pressure in channel A.
A check valve (5) can be optionally installed for free hydraulic fluid return flow back from channel A to channel P.
A pressure gauge connection (1) enables control of the sequencing pressure at the valve.
Type DZ 6 DP1–5X/…
Type DZ 6 DP1–5X/.XYM…
(measured with HLP46, ϑOil = 40 ±5 °C)
Δp-qV characteristic curves
Δp-qV characteristic curves
The characteristic curves apply for outlet pressure = zero in the entire flow range!
Version "no code"
Version “X"
Version “Y”
Version “XY"
Dimensions in mm
|
1 |
Name plate |
|
2 |
Adjustment type "1" |
|
3 |
Adjustment type "2" |
|
4 |
Adjustment type "3" |
|
5 |
Adjustment type "7" |
|
6 |
Dimensions required to remove the key |
|
7 |
Valve mounting bores |
|
8 |
Lock nut SW24 |
|
9 |
Hexagon SW10 |
|
10 |
Identical seal rings for ports A, B(X), P, T(Y) |
|
11 |
Pressure gauge connection G1/4; 12 mm deep; internal hexagon SW6 |
|
12 |
Without check valve |
|
13 |
With check valve |
|
14 |
Porting pattern according to DIN 24340 form A (without locating hole), or ISO 4401-03-02-0-05 (with locating hole for locking pin ISO 8752-3x8-St, material no. R900005694, separate order) |
Subplates (separate order)
(without locating hole)
G 341/01 (G1/4)
G 342/01 (G3/8)
G 502/01 (G1/2)
(with locating hole)
G 341/60 (G1/4)
G 342/60 (G3/8)
G 502/60 (G1/2)
Valve mounting screws (separate order)
4 hexagon socket head cap screws
ISO 4762 - M5 x 50 - 10.9-flZn-240h-L
Friction coefficient µtotal = 0.09 to 0.14,
Tightening torque MA = 7 Nm ± 10 %,
material no. R913000064
Pipe thread (G..) according to ISO 228/1
Related Products
R901204482
$487.00 USD
R901224257
$3,249.00 USD
R901489685
$1,286.00 USD
R978904424
$486.00 USD
R978021087
$376.00 USD
