VANE PUMP PVV4-1X/082RA15UMC
Manufacturer: Bosch Rexroth
Material #: R900931136
Model : PVV4-1X/082RA15UMC
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth PVV4-1X/082RA15UMC (R900931136) is a high-quality rotary vane fixed displacement pump designed for industrial applications that require reliable and efficient hydraulic power. This medium-pressure pump is notable for its low noise and low pulsation levels, contributing to a quiet and smooth operation. With a maximum operating pressure of 160 bar and a displacement of 4.1 cm³, the PVV4-1X/082RA15UMC is engineered to deliver consistent performance.
The pump features a cast iron housing with NBR seals, ensuring durability and resistance to wear in demanding environments. Its constant displacement type and clockwise rotation make it suitable for open circuit systems. The cylindrical shaft with fitting key allows for straightforward installation, while the flange connection working port provides secure attachment points.
Maintenance and serviceability are streamlined thanks to an easily removable pump insert, which includes the rotor, vane, stator ring, and control plates. This design allows for quick access without the need to remove the entire housing from its mount, significantly reducing downtime during repairs.
For applications requiring higher flow rates or redundancy, this model can be configured as a double pump by installing two pump cartridges on a joint shaft. Each cartridge has its own separate oil outlet while sharing a common suction port, allowing for versatile integration into various hydraulic systems.
Overall, the Bosch Rexroth PVV4-1X/082RA15UMC is engineered for long bearing life through hydraulic relief of the shaft and minimized wear due to hydraulically unloaded vanes. Its compact build and easy serviceability make it an excellent choice for industrial operators seeking a robust and efficient hydraulic vane pump solution.
$2,011.00 USD
More are expected on January 29, 2025
Status: This product is temporarily out of stock.
Qty: Delivered as early as January 29, 2025 when ordered in
This product is eligible for factory repair.
Fixed displacement, size 82 cm³, pressure 175 bar, clockwise rotation, 600-1800 rpm, mounting flange SAE-C
Medium pressure pump. Low noise and low pulsation level. High efficiency. Suitable for industrial applications.
Unpacked Weight: 23.823 kg
Fixed displacement Long bearing life through hydraulic relief of the shaft Low wear due to hydraulically unloaded vanes Low operating noise Easy to service due to exchangable pump cartridges Good efficiency Position of the pressure ports can be chosen Drive direction of rotation clockwise or counterclockwise Drive shaft optionally cylinderical or splined Double pump Very compact build Position of the pressure ports can be chosen separately
Hydraulic pumps of type PVV are vane pumps with constant displacement. The rotor (2) running in a stator ring (3) is located on the tooth profile of the drive shaft (1). The slots of the rotor accommodate the vanes (4) which are pressed against the internal surfaces of the stator ring by the centrifugal force upon rotation of the rotor. The displacer chambers are laterally sealed by the control plates (5). Due to the double-eccentric design of the stator ring, there are in each case two pressure chambers opposite of two suction chambers, which provides for hydraulic unloading of the shaft. So it only has to transmit the torque. The vanes are partially unloaded upon passage through the suction range. This unloading has a wear-reducing effect and ensures high efficiency. By simply removing the cover (6), the pump insert (consisting of rotor, vane, stator ring and control plates) can be removed without the need of removing the housing (7) from the pump carrier. This allows for fast maintenance and repair of the pump.
Double pumps are formed by installing two pump installation kits on one joint shaft. The oil inlet is realized by one joint suction port in the central housing (10). The oil outlet is realized separately by both pump installation kits. For the front pump installation kit, the pressure port is located in the flange housing, for the back pump installation kit in the cover. The larger pump installation kit is always located on the flange housing side. Pump installation kits of the same frame size cannot be used as double pumps.
Cast iron housing |
Rotary vane fixed displacement pump |
For industrial applications in open circuit |
With NBR seals |
Size 18 … 193 |
Frame size 1 , 2 , 4 , 5 |
Maximum operating pressure 210 bar |
Fixed displacement |
Data Sheet | Download Data Sheet |
3D CAD | Download 3D CAD |
3D CAD | Download 3D CAD |
Max. pressure | 175 |
Shaft end | Cylindrical Ø 31.7 mm with fitting key |
Size | 82 |
Speed min. | 600 |
Productgroup ID | 9,10,11,12,13,14 |
Controls | without |
Speed max. | 1800 |
Fastening | 2-hole mounting flange 127-2 according to ISO 3019-1 |
Max. flow | 120 |
Connection type, working port | Flange connection |
Displacement type | constant |
Direction of rotation | clockwise rotation |
Supply voltage | 24 VDC |
Through-drive | without |
Standards | SAE |
Weight | 23.823 |
Seals | NBR |
Hydraulic fluid | HLP |
01 |
02 |
03 |
04 |
05 |
06 |
07 |
08 |
09 |
10 |
11 |
12 |
13 |
||
PVV |
– |
1X |
/ |
15 |
* |
Pump type |
|||
01 |
Industrial version |
PVV |
|
Frame size |
|||
02 |
See selection table (e.g. single pump = 2, double pump = 52) |
||
Component series |
|||
03 |
Component series 10 ... 19 (10 ... 19: unchanged installation and connection dimensions) |
1X |
|
Displacement |
|||
04 |
See selection table (e.g. 55.2 cm3 = 055) |
||
Direction of rotation |
|||
05 |
clockwise |
R |
|
counterclockwise rotation |
L |
||
Shaft end version |
|||
06 |
Cylindrical drive shaft (standard) |
A 1) |
|
Cylindrical drive shaft (reinforced version) only BG2 to B54 |
B |
||
Multi-spline shaft |
J |
||
Line connection |
|||
07 |
Suction and pressure port: SAE flange connection, mounting thread UNC |
15 |
|
Position of the pressure connection at the flange (looking at the cover) |
|||
08 |
top (0° from the input) |
D |
|
right (90° to the right of the input) |
R |
||
counterclockwise (90° to the left of the input) |
L |
||
bottom (180° from the input) |
U |
||
Position of the pressure connection at the cover (looking at the cover), only with double pumps |
|||
09 |
BG21, 41, 42, 51, 52 |
top (45° from the input) |
D |
right (135° to the right of the input) |
R |
||
counterclockwise (45° to the left of the input) |
L |
||
bottom (135° to the left of the input) |
U |
||
BG54 |
top (0° from the input) |
D |
|
right (90° to the right of the input) |
R |
||
counterclockwise (90° to the left of the input) |
L |
||
bottom (180° from the input) |
U |
||
Seal material |
|||
10 |
NBR seals |
M |
|
FKM seals |
V |
||
Flange design |
|||
11 |
BG1, 2, 21 |
101-2 (SAE-B) |
B |
BG4, 5, 41, 42, 51, 52, 54 |
127-2 (SAE-C) |
C |
|
Through-drive |
|||
12 |
Non through-drive |
no code |
|
82-2, 16-4 (SAE-A, 9T) |
K01 |
||
101-2, 22-4 (SAE-B, 13T) |
K02 |
||
127-2, 32-4 (SAE-C, 14T) |
K07 |
||
Additional details |
|||
13 |
Further details in the plain text |
* |
1) | Not available for through-drive pumps |
Order example
Single pump: Industrial version (also as mobile version)
PVV 2-1X/055RA15DMB
Double pump: Mobile version (also as industrial version)
PVQ 52-1X/154-068RB15DDMC
Selection table
Single pump without through-drive |
|
Single pump with through-drive |
||||
Frame size |
Displacement Frame size |
Frame size |
Displacement |
|||
1 |
18 cm3 |
= 018 |
2 |
40,1 cm3 |
= 040 |
|
27,4 cm3 |
= 027 |
45,4 cm3 |
= 045 |
|||
36,4 cm3 |
= 036 |
55,2 cm3 |
= 055 |
|||
39,5 cm3 |
= 040 |
60,0 cm3 |
= 060 |
|||
45,9 cm3 |
= 046 |
67,5 cm3 |
= 068 |
|||
2 |
40,1 cm3 |
= 040 |
4 |
69,0 cm3 |
= 069 |
|
45,4 cm3 |
= 045 |
81,6 cm3 |
= 082 |
|||
55,2 cm3 |
= 055 |
97,7 cm3 |
= 098 |
|||
60,0 cm3 |
= 060 |
112,7 cm3 |
= 113 |
|||
67,5 cm3 |
= 068 |
121,6 cm3 |
= 122 |
|||
4 |
69,0 cm3 |
= 069 |
5 |
138,6 cm3 |
= 139 |
|
81,6 cm3 |
= 082 |
153,5 cm3 |
= 154 |
|||
97,7 cm3 |
= 098 |
162,2 cm3 |
= 162 |
|||
112,7 cm3 |
= 113 |
183,4 cm3 |
= 183 |
|||
121,6 cm3 |
= 122 |
193,4 cm3 |
= 193 |
|||
5 |
138,6 cm3 |
= 139 |
||||
153,5 cm3 |
= 154 |
|||||
162,2 cm3 |
= 162 |
|||||
183,4 cm3 |
= 183 |
|||||
193,4 cm3 |
= 193 |
Selection table
Double pump |
||||
Frame size |
flange-side |
cover-side |
||
Displacement |
||||
21 |
40,1 cm3 |
= 040 |
18 cm3 |
= 018 |
45,4 cm3 |
= 045 |
27,4 cm3 |
= 027 |
|
55,2 cm3 |
= 055 |
36,4 cm3 |
= 036 |
|
60,0 cm3 |
= 060 |
39,5 cm3 |
= 040 |
|
67,5 cm3 |
= 068 |
45,9 cm3 |
= 046 |
|
41 |
69,0 cm3 |
= 069 |
18 cm3 |
= 018 |
81,6 cm3 |
= 082 |
27,4 cm3 |
= 027 |
|
97,7 cm3 |
= 098 |
36,4 cm3 |
= 036 |
|
112,7 cm3 |
= 113 |
39,5 cm3 |
= 040 |
|
121,6 cm3 |
= 122 |
45,9 cm3 |
= 046 |
|
42 |
69,0 cm3 |
= 069 |
40,1 cm3 |
= 040 |
81,6 cm3 |
= 082 |
45,4 cm3 |
= 045 |
|
97,7 cm3 |
= 098 |
55,2 cm3 |
= 055 |
|
112,7 cm3 |
= 113 |
60,0 cm3 |
= 060 |
|
121,6 cm3 |
= 122 |
67,5 cm3 |
= 068 |
|
51 |
138,6 cm3 |
= 139 |
18 cm3 |
= 018 |
153,5 cm3 |
= 154 |
27,4 cm3 |
= 027 |
|
162,2 cm3 |
= 162 |
36,4 cm3 |
= 036 |
|
183,4 cm3 |
= 183 |
39,5 cm3 |
= 040 |
|
193,4 cm3 |
= 193 |
45,9 cm3 |
= 046 |
|
52 |
138,6 cm3 |
= 139 |
40,1 cm3 |
= 040 |
153,5 cm3 |
= 154 |
45,4 cm3 |
= 045 |
|
162,2 cm3 |
= 162 |
55,2 cm3 |
= 055 |
|
183,4 cm3 |
= 183 |
60,0 cm3 |
= 060 |
|
193,4 cm3 |
= 193 |
67,5 cm3 |
= 068 |
|
54 |
138,6 cm3 |
= 139 |
69,0 cm3 |
= 069 |
153,5 cm3 |
= 154 |
81,6 cm3 |
= 082 |
|
162,2 cm3 |
= 162 |
97,7 cm3 |
= 098 |
|
183,4 cm3 |
= 183 |
112,7 cm3 |
= 113 |
|
193,4 cm3 |
= 193 |
121,6 cm3 |
= 122 |
01 |
02 |
03 |
04 |
05 |
06 |
|||
INSTALLATION KIT |
PVV |
– |
1X |
/ |
Pump type |
|||
01 |
Industrial version |
PVV |
|
Frame size |
|||
02 |
Frame Size 1 |
1 |
|
Frame Size 2 |
2 |
||
Frame size 4 |
4 |
||
Frame size 5 |
5 |
||
Component series |
|||
03 |
Component series 10 ... 19 (10 ... 19: unchanged installation and connection dimensions) |
1X |
|
Size / displacement |
|||
04 |
Frame Size 1 |
18,0 cm3 |
018 |
27,4 cm3 |
027 |
||
45,4 cm3 |
036 |
||
39,5 cm3 |
040 |
||
45,9 cm3 |
046 |
||
Frame Size 2 |
40,1 cm3 |
040 |
|
45,4 cm3 |
045 |
||
55,2 cm3 |
055 |
||
60,0 cm3 |
060 |
||
67,5 cm3 |
068 |
||
Frame size 4 |
69,0 cm3 |
069 |
|
81,6 cm3 |
082 |
||
97,7 cm3 |
098 |
||
112,7 cm3 |
113 |
||
121,6 cm3 |
122 |
||
Frame size 5 |
138,6 cm3 |
139 |
|
153,5 cm3 |
154 |
||
162,2 cm3 |
162 |
||
183,4 cm3 |
183 |
||
193,4 cm3 |
193 |
||
Direction of rotation |
|||
05 |
clockwise |
R |
|
counterclockwise rotation |
L |
||
06 |
Installation kit for single pumps or flange-side for double pump |
no code |
|
Installation kit for cover-side installation in double pumps |
D |
Frame size |
|
1 | 2 | 4 | 5 | ||||||||||||||||||
Size |
|
18 | 27 | 27 | 27 | 46 | 40 | 45 | 55 | 60 | 68 | 69 | 82 | 98 | 113 | 122 | 139 | 154 | 162 | 183 | 193 | ||
Component series |
|
1X | |||||||||||||||||||||
Mounting type |
|
Flange mounting according to SAE J744 | |||||||||||||||||||||
Line connections |
|
SAE flange design (mounting thread: UNC) | |||||||||||||||||||||
Installation position |
|
Any, inlet port at top preferred | |||||||||||||||||||||
Shaft load |
|
Radial and axial forces cannot be transmitted | |||||||||||||||||||||
Direction of rotation |
|
Drive direction of rotation clockwise or counterclockwise | |||||||||||||||||||||
Drive |
|
Direct, coaxial drive | |||||||||||||||||||||
Drive speed 1) 2) |
n |
rpm |
600 ... 1,800 | ||||||||||||||||||||
Displacement |
Vg |
cm³ |
18 | 27.4 | 36.4 | 39.5 | 45.9 | 40.1 | 45.4 | 55.2 | 60 | 67.5 | 69 | 81.6 | 97.7 | 112.7 | 121.6 | 138.6 | 153.5 | 162.2 | 183.4 | 193.4 | |
Drive power 3) |
Pmax |
kW |
1.1 | 1.5 | 2.2 | 3 | 4 | 5.5 | 7.5 | 11 | |||||||||||||
Flow, max. 4) |
qV |
l/min |
26 | 39 | 53 | 59 | 70 | 59 | 66 | 80 | 89 | 100 | 101 | 120 | 141 | 167 | 177 | 203 | 223 | 234 | 267 | 285 | |
Operating pressure, absolute |
Inlet 5) 6) |
pmin-max |
bar |
0.83 ... 2.4 | |||||||||||||||||||
Outlet |
pmax |
bar |
210 | 160 | 140 | 175 | |||||||||||||||||
Pressure peak |
pmax |
|
At most 10 % over the max. permanent output pressure; not longer than 0.5 s | ||||||||||||||||||||
Mass 7) |
m |
kg |
12 | 14.8 | 23 | 34 |
1) | At 1 bar inlet pressure |
2) | If phosphoric acid esters (HFD-R) are used, adm. nmax = 1200 rpm |
3) | At Δp ≈ 0 bar, n ≈ 1450 rpm |
4) | at n = 1500 rpm, p = 0,7 bar, v = 25 mm2/s |
5) | Recommended: 1 ... 1,35 bar |
6) | If liquids containing water and phosphoric acid esters are used, at least 0,9 bar |
7) | Single pump without through-drive |
Hydraulic fluid
Permissible hydraulic fluid 1) |
Mineral oil (HLP) to DIN 51524-2 | |
Hydraulic fluid temperature range 2) |
°C |
-10 … +70 |
Viscosity range |
mm²/s |
13 … 860 |
Maximum admissible degree of contamination of the hydraulic fluid 3) |
Class 20/18/15 according to ISO 4406 (c) |
1) | For more information and data on the use of other hydraulic fluids please contact us. |
2) | Observe the admissible viscosity range! |
3) | The cleanliness classes specified for the components must be adhered to in hydraulic systems. Effective filtration prevents faults and simultaneously increases the life cycle of the components. For the selection of the filters, see www.boschrexroth.com/filter. |
For applications outside these parameters, please consult us!
The specified values for the max. drive speed apply to an absolute pressure at the input of 1 bar.
Depending on the absolute pressure at the input, the admissible max. speed must be corrected according to the following diagram.
BG1; BG2; BG4; BG21; BG41; BG42
BG5; BG51; BG52; BG54
Drive torque (measured with ν = 41 mm2/s; ϑ = 50 °C)
Sound pressure level measured in the low-noise chamber according to DIN 45635 part 26.
Distance microphone - pump = 1 m. ν = 41 mm2/s; n = 1500 and ϑ = 50 °C
BG1
BG2
BG4
BG5
The sound pressure levels for double pumps are - on the average - 1 to 3 db(A) higher than the values for single pumps.
Drive power (measured with ν = 41 mm2/s; ϑ = 50 °C)
n = 1500 min-1
n = 1800 min-1
Displacement, speed-dependent (measured with ν = 41 mm2/s; ϑ = 50 °C; p = 7 bar)
Flow loss, pressure-dependent (measured with ν = 41 mm2/s; ϑ = 50 °C)
Double pump
Single pump
Single pump PVV / PVQ, BG1
Dimensions in mm
1 |
Suction port SAE 1 1/2“ |
2 |
Pressure connection SAE 3/4" |
3 |
cylindrical drive shaft |
Shaft end for BG1
Version "A"
Cylindrical drive shaft (standard)
4 fitting key ▢ 4.76 x 31.8
Admissible torque 250 Nm
Dimensions in mm
Version J
Multi-spline shaft SAE-B 7/8”
13 teeth 16/32DP
Tooth thickness t = 2.261
Admissible torque 316 Nm
Dimensions in mm
Single pump PVV / PVQ, BG2; 4; 5
Dimensions in mm
1 |
Suction port |
2 |
Pressure port |
3 |
Cylindrical drive shaft (nominal dimensions of the drive shafts see double pump PVV / PVQ, BG54) |
BG |
Suction port |
||||||
ØD5 |
D8-2B |
B3 |
L6 |
L4 |
H1 |
||
2 |
SAE 1 1/2" |
38 mm |
1/2"-13UNC; 22 mm |
69,9 mm |
35,7 mm |
120,6 mm |
76,2 mm |
4 |
SAE 2" |
50,8 mm |
1/2"-13UNC; 23,8 mm |
77,7 mm |
42,8 mm |
125,5 mm |
82,6 mm |
5 |
SAE 3" |
76,2 mm |
5/8"-13UNC; 28,6 mm |
106,3 mm |
61,9 mm |
153,2 mm |
93,6 mm |
BG |
Pressure port |
|||||
ØD6 |
D7-2B |
B4 |
L7 |
L3 |
||
2 |
SAE 1" |
25,4 mm |
3/8"-16UNC; 19 mm |
52,4 mm |
26,2 mm |
38,1 mm |
4 |
SAE 1 1/4" |
31,8 mm |
7/16"-14UNC; 22 mm |
58,7 mm |
30,1 mm |
38,1 mm |
5 |
SAE 1 1/2" |
38,1 mm |
1/2"-13UNC; 23,8 mm |
69,9 mm |
35,7 mm |
42,9 mm |
BG |
Mounting flange |
B2 |
L1 |
H2 |
|||||||
B1 |
ØD1 |
ØD2 |
ØD3 |
ØD4-0,05 mm |
L2 |
L5 |
|||||
2 |
SAE-B |
174 mm |
14 mm |
146 mm |
121 mm |
101,6 mm |
9,5 mm |
13 mm |
117 mm |
163 mm |
64 mm |
4 |
SAE-C |
212 mm |
17,5 mm |
181 mm |
148 mm |
127 mm |
9,5 mm |
16 mm |
140 mm |
186 mm |
70 mm |
5 |
SAE-C |
212 mm |
17,5 mm |
181 mm |
148 mm |
127 mm |
12,7 mm |
16 mm |
159 mm |
216 mm |
83 mm |
PVV / PVQ 2...K.. - with through-drive
Dimensions in mm
PVV / PVQ 4...K.. - with through-drive
Dimensions in mm
PVV, PVQ 5...K.. - with through-drive
Dimensions in mm
Double pump PVV / PVQ, BG21; 41; 42; 51; 52
Dimensions in mm
1 |
Suction port |
2.1 |
Pressure connection, flange-side |
2.2 |
Pressure connection, cover-side |
3 |
Cylindrical drive shaft (nominal dimensions of the shaft ends see shaft end for BG2 to 54) |
BG |
Mounting flange |
|||||||
B1 |
ØD1 |
ØD2 |
ØD3 |
ØD4-0,05 mm |
L2 |
L5 |
||
21 |
SAE-B |
174 mm |
14 mm |
146 mm |
121 mm |
101,6 mm |
9,5 mm |
13 mm |
41; 42 |
SAE-C |
212 mm |
17,5 mm |
181 mm |
148 mm |
127 mm |
9,5 mm |
16 mm |
51; 52 |
SAE-C |
212 mm |
17,5 mm |
181 mm |
148 mm |
127 mm |
12,7 mm |
16 mm |
BG |
Suction port |
||||||
ØD5 |
D8-2B |
B3 |
L6 |
L4 |
H1 |
||
21 |
SAE 1 1/2" |
63,5 mm |
1/2"-13UNC; 23,8 mm |
88,5 mm |
50,8 mm |
101,6 mm |
84,1 mm |
41; 42 |
SAE 3" |
76,2 mm |
5/8"-11UNC; 28,6 mm |
106,3 mm |
61,9 mm |
114,4 mm |
88,9 mm |
51; 52 |
SAE 3 1/2" |
88,9 mm |
5/8"-11UNC; 31,8 mm |
120,7 mm |
69,9 mm |
119,3 mm |
102,4 mm |
BG |
Pressure connection, flange-side |
||||||
ØD6 |
D7-2B |
B4 |
L7 |
L3 |
H4 |
||
21 |
SAE 1" |
25,4 mm |
3/8"- 16UNC; 19,1 mm |
52,4 mm |
26,2 mm |
38,1 mm |
76,2 mm |
41; 42 |
SAE 1 1/4" |
31,8 mm |
7/16"- 14UNC; 21,6 mm |
58,7 mm |
30,1 mm |
38,1 mm |
82,6 mm |
51; 52 |
SAE 1 1/2" |
38,1 mm |
1/2"- 13UNC; 23,8 mm |
69,9 mm |
35,7 mm |
42,9 mm |
93,6 mm |
BG |
Pressure connection, cover-side |
|||||||||
ØD11 |
D12-2B |
B5 |
L12 |
L11 |
H6 |
B2 |
L1 |
H2 |
||
21 |
SAE 3/4" |
19,1 mm |
3/8"-16UNC; 19,1 mm |
47,6 mm |
22,2 mm |
88 mm |
76,2 mm |
132 mm |
252 mm |
64 mm |
41 |
SAE 3/4" |
19,1 mm |
3/8"-16UNC; 19,1 mm |
47,6 mm |
22,2 mm |
99,5 mm |
74,7 mm |
140 mm |
275 mm |
70 mm |
42 |
SAE 1" |
25,4 mm |
3/8"-16UNC; 19,1 mm |
52,4 mm |
26,2 mm |
109,5 mm |
76,2 mm |
143 mm |
288 mm |
74 mm |
51 |
SAE 3/4" |
19,1 mm |
3/8"-16UNC; 19,1 mm |
47,6 mm |
22,2 mm |
119,5 mm |
74,7 mm |
162 mm |
306 mm |
85 mm |
52 |
SAE 1" |
25,4 mm |
3/8"-16UNC; 19,1 mm |
52,4 mm |
26,2 mm |
135,8 mm |
76,2 mm |
162 mm |
324 mm |
85 mm |
Double pump PVV / PVQ, BG54
Dimensions in mm
1 |
Suction port |
2.1 |
Pressure connection, flange-side |
2.2 |
Pressure connection, cover-side |
3 |
Cylindrical drive shaft (nominal dimensions of the shaft ends see tables) |
4 |
Fitting key (dimensions see table) |
Shaft end for BG2 to 54
Dimensions in mm
Shaft design A |
||||||
BG |
L8 |
L9 |
H3 |
ØD9 |
Fitting key |
Tmax in Nm |
2; 21 |
46,8 mm |
59 mm |
24,5-0,2 mm |
22,23-0,3 mm |
▢ 4,76 mm x 31,8 mm |
250 |
4; 41; 42 |
61,9 mm |
73,2 mm |
35,2-0,3 mm |
31,75-0,3 mm |
▢ 7,9 mm x 38,1 mm |
407 |
5; 51; 52; 54 |
47,8 mm |
62 mm |
35,2-0,3 mm |
31,75-0,3 mm |
▢ 7,9 mm x 28,4 mm |
610 |
Shaft design B |
||||||
BG |
L8 |
L9 |
H3 |
ØD9 |
Fitting key |
Tmax in Nm |
2; 21 |
64 mm |
78 mm |
28,3-0,2 mm |
25,37-0,02 mm |
▢ 6,36 mm x 50,8 mm |
400 |
4; 41; 42 |
74,6 mm |
86 mm |
38,6-0,3 mm |
34,9-0,03 mm |
▢ 7,9 mm x 54,6 mm |
600 |
5; 51; 52; 54 |
73 mm |
88 mm |
42,37-0,23 mm |
38,07-0,02 mm |
▢ 9,5 mm x 54,6 mm |
810 |
Shaft design J |
||||||
BG |
L8 |
L9 |
L10 |
ØD10 |
Tmax in Nm |
Gearing data |
2; 21 |
33,3 mm |
41 mm |
4 mm |
27,8 mm |
316 |
SAE-B 7/8", 13 teeth, 16/32 DP |
4; 41; 42 |
42,1 mm |
56 mm |
3,04 mm |
35,05 mm |
580 |
SAE-C 1/4", 14 teeth, 12/24 DP |
5; 51; 52; 54 |
46,6 mm |
56 mm |
9,7 mm |
41,28 mm |
818 |
SAE-C 1/4", 14 teeth, 12/24 DP |
Maximum admissible through-drive torques in Nm |
|||
BG |
Through-drive |
||
K01 (SAE-A, 9T) |
K02 (SAE-B, 13T) |
K07 (SAE-C, 14T) |
|
2 |
131 |
316 |
- |
4 |
131 |
316 |
437 |
5 |
131 |
384 |
702 |
SAE connection flanges
Suction port |
Pressure connection for PVV / PVQ 1) |
NG |
Seal material |
Material number for flange with |
B1 |
B2 |
B3 |
B4 |
ØD1 |
ØD2 |
D3 |
Mounting screws |
|
Welded connection |
Threaded connection |
||||||||||||
1; 21; 41; 51 |
3/4“ |
NBR |
R900211169 |
R900063050 |
47,6 mm |
65 mm |
22,2 mm |
52 mm |
25 mm |
19 mm |
G3/4 |
3/8"-16UNC |
|
2; 21; 42; 52 |
1“ |
NBR |
R900211170 |
R900211175 |
52,4 mm |
70 mm |
26,2 mm |
59 mm |
30 mm |
22 mm |
G1 |
3/8"-16UNC |
|
4; 41; 42; 54 |
1 1/4" |
NBR |
R900211363 |
R900211172 |
58,7 mm |
79 mm |
30,2 mm |
68 mm |
38 mm |
28 mm |
G1 1/4 |
7/16"-14UNC |
|
5; 51; 52; 54 |
1 1/2" |
NBR |
R900211168 |
R900211171 |
69,9 mm |
95 mm |
35,7 mm |
76 mm |
38 mm |
30 mm |
G1 1/2 |
1/2"-13UNC |
|
1; 2 |
1 1/2" |
NBR |
R900211165 |
R900211171 |
69,9 mm |
95 mm |
35,7 mm |
76 mm |
48 mm |
39 mm |
G1 1/2 |
1/2"-13UNC |
|
4 |
2" |
NBR |
R900211434 |
R900211173 |
77,8 mm |
102 mm |
42,9 mm |
90 mm |
60 mm |
49 mm |
G2 |
1/2"-13UNC |
|
21 |
2 1/2" |
NBR |
R900063063 |
R900211174 |
88,9 mm |
114 mm |
50,8 mm |
104 mm |
76 mm |
62 mm |
G2 1/2 |
1/2"-13UNC |
|
5; 41; 42 |
3" |
NBR |
R900211362 |
‒ |
106,3 mm |
135 mm |
61,9 mm |
131 mm |
76 mm |
70 mm |
‒ |
5/8"-11UNC |
|
51; 52 |
3 1/2" |
NBR |
R900211166 |
‒ |
130,7 mm |
152 mm |
69,9 mm |
140 mm |
89 mm |
82 mm |
‒ |
5/8"-11UNC |
|
54 |
4" |
NBR |
R900211167 |
‒ |
130,2 mm |
162 mm |
77,8 mm |
152 mm |
114 mm |
107 mm |
‒ |
5/8"-11UNC |
1) | Bold figure specifies the stage for which the flange (with double pumps) is intended. |
The material numbers comprise the flange, the O-ring and the mounting screws.
Pipe thread "G" according to ISO 228/1
Comprehensive information and suggestions are contained in the Hydraulics Trainer, volume 3, RE 00281, “Project planning information and design of hydraulic systems".
When using vane pumps, we recommend particularly observing the information specified below.
Technical data
All specified Technical data depend on production tolerances and are valid at certain boundary conditions.
Please note that consequently, fluctuations are possible and that with certain boundary conditions (e.g. viscosity), the Technical data may also change.
Characteristic curves
When designing the drive motor, please observe the maximum application parameters possible shown by the presented characteristic curves.
Noise
The values for sound pressure level shown on page 8 have been measured based on DIN 45635, sheet 26. That means that only the sound emission of the pump is shown.
Environmental influences (place of installation, piping, etc.) have not been considered.
These values are in each case only valid for one pump.
With unfavorable influences at the place of installation of the power unit, the sound pressure level may, however, still be 5 to 10 db(A) higher than the values of the pump itself.
Drive
Electric motor + pump carrier + coupling + pump
Attention!
no radial and axial forces on the pump drive shaft admissible! Motor and pump must be exactly aligned! use a torsionally flexible couplingFluid tank
Adjust useful volume of the tank to the operating conditions.Attention!
The admissible fluid temperature must not be exceeded use coolers, if necessary!Lines and connections
Cut with an inclination of 45° Remove the protective plug at the pump We recommend using seamless precision steel pipes according to DIN 2391 and releasable pipe connections. Select the inner width of the pipes according to the connections Pipelines and fittings must be carefully cleaned before assembly. – min. distance 120 mm to the tank bottom Dirt deposits are not sucked in or raised min. 50 mm immersion depth, also with lowest fluid level admissible Foam formation is avoided Leakage and return fluid must not be directly sucked in again under any circumstances! Liquid temperature remains low For the inlet pressure refer to the Technical dataRecommendation for pipe-laying
Return fluid must not be directly sucked in again under any circumstances, i.e. select the largest distance possible between suction and return line Return flow outlet must always lie below the oil level Ensure suction-tight assembly of the pipelines
Filter
Use return flow or pressure filter if possible. (Suction filters only in connection with underpressure switch/clogging indicator).Hydraulic fluid
Please observe our provisions according to catalog sheet RE 07075. We recommend brand hydraulic fluids. Different hydraulic fluid types must not be mixed as this might result in degradation and deterioration of the lubricity. According to the operating conditions, the liquid must be renewed at certain time intervals. In this connection, it is also necessary to clean the fluid tank from residues.admissible installation positions
horizontal position preferredB3
B5
V1
Commissioning
Check whether the system has been assembled carefully and properly. Only fill in hydraulic fluid through filters with the required minimum retention rate. Observe the arrow indicating the direction of rotation. Start up the pump without load and allow to pump at zero pressure for some seconds in order to allow for sufficient lubrication. Do not operate the pump without oil under any circumstances. If the pump does not deliver medium without bubbles after approx. 20 seconds, the system must be checked once again. After the operating values have been reached, check the pipe connections for leak-tightness. Check the operating temperature.Bleeding
Before the initial commissioning, we recommend filling the housing and the suction line of the pump with oil. This increases the operational safety and prevents wear in case of unfavorable installation conditions. During the initial commissioning, the foaming oil has to be discharged in circulation at zero pressure by carefully opening the pressure flange (provide splashguard, if necessary). Only re-tighten the fitting applying the specified torque if bubble-free oil exits.General information
The pumps delivered by us have been checked for function and performance. Changes of any kind at the pump are not admissible; otherwise, the warranty will become void! Repair works may only be carried out by the manufacturer or their authorized dealers and agencies. No warranty is accepted for independently performed repairs.Notice!
Assembly, maintenance and repair of the pump may only be carried out by authorized, trained and instructed personnel. Pump may only be operated with the admissible data (see Technical data)! The pump may only be operated if it is in an unobjectionable condition. For all works at the pump, depressurize the system! Unauthorized modifications or changes which affect the safety and function are not admissible! Apply protective devices (e. g. coupling guard) and/or do not remove existing protective devices! Always ensure tight seat of all mounting screws! (Observe the specified tightening torque) The generally valid safety and accident prevention regulations must be imperatively complied with!For limitation of the operating pressure or (and) for the solenoid-actuated unloading of the operating pressure, we recommend our pump safety blocks according to RE 25880 and RE 25890.
Related Products
R900490630
$2,313.00 USD
R978004983
$1,758.00 USD
R900950955
$3,372.00 USD
R900961088
$4,392.00 USD
R978906600
$3,933.00 USD