LFA40WEMA-7X/P15F12
Manufacturer: Bosch Rexroth
Material #: R900764354
Model : LFA40WEMA-7X/P15F12
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth LFA40WEMA-7X/P15F12 (R900764354) is a high-quality way cartridge valve designed for integration into a compact block system. This valve is engineered to be installed in a standardized receiving hole according to ISO specifications and is typically sealed with a control cover that connects the power section to the pilot control valves. The LFA40WEMA-7X/P15F12 allows for various hydraulic functions including pressure, directional, and throttle operations, or any combination thereof. This adaptability makes it an ideal choice for applications requiring multiple functions within one component, offering cost-effective solutions.
The model features a control cover that houses the control bores and may include additional functionalities such as stroke limitation, hydraulically controlled directional seat valves, or shuttle valves depending on the needed function. Electrically operated directional spool or seat valves can also be accommodated by the control cover if necessary. The installation kit comprises several parts including a bushing, ring (up to NG), valve poppet (with or without damping nose), and closing spring.
This way cartridge valve operates based on pressure differences across three areas: A1, A2, and A3. These areas are critical for its function, with area ratios of either 0.7:1 or 1:1 between A2 and A1, influencing the spool position through the interplay of opening and closing forces. The valve facilitates flow from A to B or vice versa while ensuring that when area A3 is pressurized by pilot oil from channel B or an external source, channel A remains blocked without leakage.
The LFA40WEMA-7X/P15F12 is part of Bosch Rexroth's standard series with size specifications and component series X and X2 options. It is capable of handling maximum operating pressures up to bar levels and supports maximum flow rates measured in liters per minute (l/min). The versatility in area ratios and available springs allows this model to accommodate different cracking pressures according to specific application requirements.
$1,303.00 USD
More are expected on April 8, 2025
Status: This product is temporarily out of stock.
Qty: Delivered as early as April 8, 2025 when ordered in
This product is eligible for factory repair.
2-way cartridge valves are elements that have been designed for a compact block design. The power section with connections A and B is installed into the control block in a receiving hole standardized according to ISO 7368 and closed with a cover. In most cases, the cover is also the connection from the control side of the power section to the pilot control valves.
By control with respective pilot control valves, the power section can be applied for pressure, directional and throttle functions or a combination of these functions. Particularly efficient solutions are realized by adjustment of the size to various flows of the individual ways of an actuator. The application of power sections of elements for multiple functions is very cost-effective.
2-way cartridge valves generally consist of control cover (1) and installation kit (2). The control cover contains the control bores and optionally a stroke limitation function, a hydraulically controlled directional seat valve or a shuttle valve according to the required overall function. Additionally, electrically operated directional spool or seat valves can be installed at a control cover. The installation kit consists of a bushing (3), ring (4) (only up to NG32), valve poppet (5), optionally with damping nose (6) or without damping nose (7) as well as closing spring (8).
The function of 2-way cartridge valves is pressure-dependent. This way, three crucial pressurized areas A1, A2, A3 are realized for the function. The area at valve seat A1 is observed as 100 %. Depending on the version, the annulus area A2 realized by grading is 7 % or 50 % of area A1. The area ratio A1 : A2 is respectively either 14.3 : 1 or 2 : 1. The area A3 is identical to the sum of areas A1 + A2. Due to the different area ratios A1 : A2 and the resulting different annulus areas (A2), the area A3 is one time 107 % and another time 150 % of the area A1 at the seat, which is observed as 100 %.
In general, the following applies:
The areas A1 and A2 are effective in opening direction. The area A3 and the spring are effective in closing direction. The direction of action of the resulting force from the opening and closing forces determines the spool position of the 2-way cartridge valve.
The 2-way cartridge valves can be passed from A to B or from B to A. Pressurization of area A3 by pilot oil discharge from channel B or external pilot oil supply, channel A is blocked without leakage.
|
01 |
02 |
03 |
04 |
05 |
06 |
07 |
||
|
LFA |
WEMA |
– |
/ |
|
Type |
||
|
01 |
Control cover LFA |
LFA |
|
Size |
||
|
02 |
NG 16 |
16 |
|
NG 25 |
25 |
|
|
NG 32 |
32 |
|
|
NG 40 |
40 |
|
|
NG 50 |
50 |
|
|
NG 63 |
63 |
|
|
NG 80 |
80 |
|
|
NG 100 |
100 |
|
|
NG 125 |
125 |
|
|
Version |
||
|
03 |
Control cover version "WEMA": For set-up of a directional valve |
WEMA |
|
Component series |
||
|
04 |
Component series 70 ... 79 (70 ... 79: unchanged installation and connection dimensions) 1) |
7X |
|
Component series 60 … 69 (60 … 69: unchanged installation and connection dimensions) 2) |
6X |
|
|
Component series 20 ... 29 (20 ... 29: unchanged installation and connection dimensions) 3) |
2X |
|
|
Nozzle fitting |
||
|
05 |
Orifice in channel P 4) |
P.. |
|
06 |
Orifice in channel T 4) |
T.. |
|
07 |
Orifice in channel F 4) |
F.. |
| 1) Component series 7X for sizes 16...63 | |
| 2) Component series 6X for sizes 80 and 100 | |
| 3) Component series 2X for size 125 | |
| 4) This orifice is designed as screw-type orifice. If an orifice is to be installed, the respective code letter with the orifice Ø in 1/10 mm has to be entered in the type designation. | |
| Example: P12 = Orifice with Ø1.2 mm in channel P. Additional orifice Ø see diagrams/characteristic curves. |
|
Orifice symbol |
Symbol in ordering code |
|||
|
A** |
|
A** |
|
This orifice is designed as screw-type orifice. If an orifice is to be installed, the respective code letter with the orifice Ø in 1/10 mm has to be entered in the type designation. Example: A12 = Orifice with Ø1.2 mm in channel A. |
|
Ø1,2 |
|
|
This orifice is designed as bore. No specifications are made in the type designation. (Orifice Ø in mm) |
|
|
Z12 |
|
|
This orifice is designed as screw-type orifice. This is a standard orifice. No specifications are made in the type designation. (Orifice Ø in 1/10 mm) |
|
Notices:
For ordering code of orifices, see "Accessories" Additional functions with special numbers see "Information".
LFA . WEMA… (NG16 … 32)
LFA . WEMA… (NG40 … 100)
Control cover "WEMA" for set-up of a directional valve: NG16 ... 50
Dimensions in mm
|
1 |
Name plate at NG16, 25, 32 |
|
2 |
Name plate at NG40 and 50 |
|
3 |
Ports X, Y, Z1 and Z2 optionally as threaded ports at NG40 and 50 |
|
4 |
Plug screw M6 at type WEMB |
|
5 |
Plug screw M6 at type WEMA |
|
6 |
Directional spool valve type 4WE 6 D… (pilot control valve), separate order |
|
7 |
Directional seat valve type M-3SEW 6 … (pilot control valve), separate order |
|
8 |
Porting pattern according to ISO 4401-03-02-0-05 (mounting thread for version "/12" see data sheet 08936) |
|
NG |
D1 |
H1 |
H2 |
H3 |
H4 |
L1 |
L2 |
L3 |
L4 |
L5 |
L6 |
L7 |
|
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
||
| 16 | - | 65 |
- - |
15 | - | 65 | 80 | - | 17 | 47.5 | - | 4 |
| 25 | - | 40 |
- - |
24 | - | 85 | 85 | - | 27 | 64 | - | 4 |
| 32 | - | 50 |
- - |
28 | - | 100 | 100 | - | 34.5 | 71.5 | - | 4 |
| 40 | G1/2 | 60 |
30 - |
32 | 30 | 125 | 125 | 53 | 47 | 84 | 72 | 6 |
| 50 | G1/2 | 68 |
32 - |
34 | 32 | 140 | 140 | 60 | 54.5 | 91.5 | 80 | 6 |
Control cover "WEMA" for set-up of a directional valve: NG63
Dimensions in mm
|
1 |
Name plate |
|
2 |
Ports X, Y, Z1 and Z2 optionally as threaded ports |
|
3 |
Plug screw M8 x 1 at type WEMB |
|
4 |
Plug screw M8 x 1 at type WEMA |
|
5 |
Directional spool valve type 4WE 10 D… (pilot control valve), separate order |
|
6 |
Directional seat valve type M-3SEW 10 … (pilot control valve), separate order |
|
7 |
Porting pattern according to ISO 4401-05-04-0-05 (mounting thread for version "/12" see data sheet 08936) |
Control cover "WEMA" for set-up of a directional valve: NG80 ... 100
Dimensions in mm
|
1 |
Name plate |
|
2 |
Ports X, Y, Z1 and Z2 optionally as threaded ports |
|
3 |
Plug screw M8 x 1 at type WEMB |
|
4 |
Plug screw M8 x 1 at type WEMA |
|
5 |
Directional spool valve type 4WE 10 D… (pilot control valve), separate order |
|
6 |
Directional seat valve type M-3SEW 10 … (pilot control valve), separate order |
|
7 |
Porting pattern according to ISO 4401-05-04-0-05 (mounting thread for version "/12" see data sheet 08936) |
|
NG |
D1 |
D2 |
H1 |
H2 |
H3 |
H4 |
L3 |
L4 |
L5 |
L6 |
|
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
||
| 80 | 250 | M8 x 1 | 80 | 42 | 45 | 26 | 10 | 10 | 16 | 27 |
| 100 | 300 | G1/8 | 100 | 55 | 52.5 | 35 | 13 | 9.5 | 27 | 26 |
|
1 |
Name plate |
|
2 |
Ports X, Y, Z1 and Z2 optionally as threaded ports |
|
3 |
Port F with check valve |
|
4 |
Directional spool valve type 4WEH 16 D... (Pilot control valve), separate order |
|
5 |
Directional seat valve type M-3SEW 16 ... (pilot control valve), separate order |
|
6 |
Porting pattern according to ISO 4401-07-07-0-05 (mounting thread for version "/12" see data sheet 08936) |
|
LFA control cover mounting screws |
||
|
Hexagon socket head cap screws ISO 4762 - 10.9-flZn/nc/480h/C 1) |
||
|
Size |
Quantity |
Tightening torque MA in Nm ±10 % |
|
16 |
4 |
30 |
|
25 |
4 |
100 |
|
32 |
4 |
240 |
|
40 |
4 |
480 |
|
50 |
4 |
480 |
|
63 |
4 |
1600 |
|
80 |
8 |
800 |
|
100 |
8 |
1600 |
|
125 |
9 |
3100 |
| 1) Hexagon socket head cap screws UNC, see data sheet 08936 |
Mounting screws included in the scope of delivery.
Notice:
The tightening torques stated are guidelines when using screws with the specified friction coefficients and when using a manual torque wrench (tolerance ± 10 %). The specified tightening torques were calculated with total friction coefficient μ = 0.09 … 0.14; adjust in case of modified surfaces. Supplied mounting screws are only suitable for direct assembly on a block. If an intermediate cover is used, mounting screws have to be designed accordingly longer (see dimensions).Installation bore and connection dimensions according to ISO 7368
Size 16 ... 63
Dimensions in mm
|
1 |
Bore for locating pin |
|
2 |
80 mm only at control cover for directional valve set-up NG16 (axis X–Y bore) |
Size 80 ... 100
Dimensions in mm
|
1 |
Bore for locating pin |
|
1 |
Bore for locating pin |
|
NG |
ØD1H7 |
ØD2 |
ØD3/(ØD3*) 2) |
ØD4H7 |
ØD5 3) |
ØD6 |
ØD7H13 |
H1 |
H2 |
H3 |
H4 |
H5 |
H6 |
H7 |
H8 |
H9 |
L1 |
L2 |
L3 |
L4 |
L5 |
W |
Ro 1) |
Ru 1) |
||||
|
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
||
| 16 | 32 | 16 |
16 25 |
25 | M8 | 4 | 4 | 42.5 | 56 | + 0.1 | 43 | + 0.2 | 20 | 11 | 2 | - | 20 | 2 | - | 0.5 |
65 80 |
46 - |
23 | 25 | 10.5 | 0.05 | 2 | 1 |
| 25 | 45 | 25 |
25 32 |
34 | M12 | 6 | 6 | 57 | 72 | + 0.1 | 58 | + 0.2 | 25 | 12 | 2.5 | - | 30 | 2.5 | - | 1 |
85 - |
58 - |
29 | 33 | 16 | 0.05 | 2 | 1 |
| 32 | 60 | 32 |
32 40 |
45 | M16 | 8 | 6 | 68.5 | 85 | + 0.1 | 70 | + 0.2 | 35 | 13 | 2.5 | - | 30 | 2.5 | - | 1.5 |
102 - |
70 - |
35 | 41 | 17 | 0.1 | 2 | 1 |
| 40 | 75 | 40 |
40 50 |
55 | M20 | 10 | 6 | 84.5 | 105 | + 0.1 | 87 | + 0.3 | 45 | 15 | 3 | - | 30 | 3 | - | 2.5 |
125 - |
85 - |
42.5 | 50 | 23 | 0.1 | 4 | 1 |
| 50 | 90 | 50 |
50 63 |
68 | M20 | 10 | 8 | 97.5 | 122 | + 0.1 | 100 | + 0.3 | 45 | 17 | 3 | - | 35 | 4 | - | 2.5 |
140 - |
100 - |
50 | 58 | 30 | 0.1 | 4 | 1 |
| 63 | 120 | 63 |
63 80 |
90 | M30 | 12 | 8 | 127 | 155 | + 0.1 | 130 | + 0.3 | 65 | 20 | 4 | - | 40 | 4 | - | 3 |
180 - |
125 - |
62.5 | 75 | 38 | 0.1 | 4 | 1 |
| 80 | 145 | 80 |
80 100 |
110 | M24 | 16 | 10 | 170.5 | 205 | + 0.1 | 175 | + 0.4 | 50 | 25 | 5 | - | 40 | 5 | - | 4.5 |
250 - |
200 - |
- | - | - | 0.1 | 4 | 1 |
| 100 | 180 | 100 |
100 125 |
135 | M30 | 20 | 10 | 205.5 | 245 | + 0.1 | 210 | + 0.4 | 63 | 29 | 5 | - | 50 | 5 | - | 4.5 |
300 - |
245 - |
- | - | - | 0.1 | 4 | 1 |
| 125 | 225 | 150 1) |
125 160 |
200 | - | - | - | 255 | 300 | + 0.15 | 257 | + 0.5 | - | 31 | 7 | ± 0.5 | 40 | 5.5 | ± 0.2 | 2 |
- - |
- - |
- | - | - | 0.1 | 4 | 1 |
| 1) | Maximum dimension |
| 2) | Due to the use of a bore with ØD3*, port B protrudes over the upper limit of the area intended in ISO 7368. This is, however, possible due to the sealing concept and reduces the pressure loss during flow through the valve. Thus, we recommend a bore with ØD3*. |
| 3) | Mounting thread for version "/12" see data sheet 08936 |
Notice:
The dimensions are nominal dimensions which are subject to tolerances.
Notices:
The specified tightening torques stated are guidelines when using screws with the specified friction coefficients and when using a manual torque wrench (tolerance ± 10%). The specified tightening torques were calculated with total friction coefficient μtotal = 0.09 ... 0.14; adjust in case of modified surfaces. Supplied mounting screws are only suitable for direct assembly on a block. If an intermediate cover is used, mounting screws have to be designed accordingly longer.Mounting screws (included in scope of delivery)
|
Hexagon socket head cap screws ISO 4762 - 10.9-flZn/nc/480h/C 1) |
||
|
Size |
Quantity |
Tightening torque MA in Nm ±10 % |
|
16 |
4 |
30 |
|
25 |
4 |
100 |
|
32 |
4 |
240 |
|
40 |
4 |
480 |
|
50 |
4 |
480 |
|
63 |
4 |
1600 |
|
80 |
8 |
800 |
|
100 |
8 |
1600 |
|
125 |
8 |
3100 |
|
160 |
12 |
5000 |
| 1) | Hexagon socket head cap screws UNC, see data sheet 08936 |
Additional functions with special numbers: Control cover (upon request)
|
Symbol |
Type |
Size |
Description / special characteristic |
|
LFA . WEMA54-6X/… |
25 |
Cover for logic zero position open |
Additional functions with special numbers (upon request)
Orifice symbol
|
Orifice symbol |
Ordering code |
|||
|
A** |
|
A** |
This orifice is designed as screw-type orifice. If an orifice is to be installed, the respective code letter with the orifice Ø in 1/10 mm has to be entered in the type designation. Example: A12 = Orifice with Ø1.2 mm in channel A. |
|
|
Ø1,2 |
|
This orifice is designed as bore. No specifications are made in the type designation. (Orifice Ø in mm) |
||
|
Z12 |
|
This orifice is designed as screw-type orifice. This is a standard orifice. No specifications are made in the type designation. (Orifice Ø in 1/10 mm) |
||
Orifice selection
Related Products
R901000355
$2,720.00 USD
R900538478
$820.00 USD
R900225845
$3,678.00 USD
R900557762
$415.00 USD
R901260695
$1,512.00 USD
