DZ6DP2-5X/60XMW2
Manufacturer: Bosch Rexroth
Material #: R900591772
Model : DZ6DP2-5X/60XMW2
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth DZ6DP2-5X/60XMW2 (R900591772) is a direct-operated pressure sequence valve designed for efficient control of hydraulic systems. This model plays a critical role in ensuring the pressure-dependent connection of secondary systems by setting sequencing pressure via its adjustable type. It features a robust compression spring that maintains the control spool in its initial position, effectively blocking the valve until the predetermined pressure threshold is reached.
Upon reaching the set value, the control spool shifts to allow fluid flow from channel P to A, enabling connected systems to operate without pressure loss in channel P. The DZ6DP2-5X/60XMW2 offers versatile control signal reception, either internally from channel P or externally through port BX. Moreover, it accommodates different methods for leakage oil discharge: externally via port TY or internally through A, with internal discharge affecting the set cracking pressure due to channel A's influence.
This model allows for the optional installation of a check valve for unidirectional hydraulic fluid return from channel A to P and includes a pressure gauge connection for monitoring sequencing pressure directly at the valve. Designed for subplate mounting, it conforms to DIN form A standards without a locating hole and ISO standards with a locating hole.
The DZ6DP2-5X/60XMW2 comes with an array of optional adjustment types such as a rotary knob, threaded pin with hexagon and protective cap, lockable rotary knob with scale, and rotary knob with scale. Its configuration also provides options for subplates ordered separately. With its size and component series X designation, this valve can handle maximum operating pressures up to bar and achieves maximum flow rates measured in liters per minute (l/min).
$1,162.00 USD
More are expected on April 21, 2025
Status: This product is temporarily out of stock.
Qty: Delivered as early as April 21, 2025 when ordered in
This product is eligible for factory repair.
Valve type DZ 6 DP is a direct operated pressure sequence valve. It is applied for pressure-dependent connection of a second system. The sequencing pressure is set via the adjustment type (4).
The compression spring (3) holds the control spool (2) in initial position, the valve is blocked. The pressure in channel P is applied via the control line (6) at the spool face of the control spool (2) opposite the compression spring (3).
If the pressure in channel P reaches the set value of the compression spring (3), the control spool (2) is moved to the left and the connection from P to A is opened. The system connected to channel A is connected without a pressure drop in channel P.
The control signal is received internally via the control line (6) from channel P or externally via port B (X).
Depending on the use of the valve, leakage oil discharge is realized externally via port T (Y) or internally via A.
Attention!
With internal leakage oil discharge, the set cracking pressure is increased by the pressure in channel A.
A check valve (5) can be optionally installed for free hydraulic fluid return flow back from channel A to channel P.
A pressure gauge connection (1) enables control of the sequencing pressure at the valve.
Type DZ 6 DP1–5X/…
Type DZ 6 DP1–5X/.XYM…
(measured with HLP46, ϑOil = 40 ±5 °C)
Δp-qV characteristic curves
Δp-qV characteristic curves
The characteristic curves apply for outlet pressure = zero in the entire flow range!
Version "no code"
Version “X"
Version “Y”
Version “XY"
Dimensions in mm
|
1 |
Name plate |
|
2 |
Adjustment type "1" |
|
3 |
Adjustment type "2" |
|
4 |
Adjustment type "3" |
|
5 |
Adjustment type "7" |
|
6 |
Dimensions required to remove the key |
|
7 |
Valve mounting bores |
|
8 |
Lock nut SW24 |
|
9 |
Hexagon SW10 |
|
10 |
Identical seal rings for ports A, B(X), P, T(Y) |
|
11 |
Pressure gauge connection G1/4; 12 mm deep; internal hexagon SW6 |
|
12 |
Without check valve |
|
13 |
With check valve |
|
14 |
Porting pattern according to DIN 24340 form A (without locating hole), or ISO 4401-03-02-0-05 (with locating hole for locking pin ISO 8752-3x8-St, material no. R900005694, separate order) |
Subplates (separate order)
(without locating hole)
G 341/01 (G1/4)
G 342/01 (G3/8)
G 502/01 (G1/2)
(with locating hole)
G 341/60 (G1/4)
G 342/60 (G3/8)
G 502/60 (G1/2)
Valve mounting screws (separate order)
4 hexagon socket head cap screws
ISO 4762 - M5 x 50 - 10.9-flZn-240h-L
Friction coefficient µtotal = 0.09 to 0.14,
Tightening torque MA = 7 Nm ± 10 %,
material no. R913000064
Pipe thread (G..) according to ISO 228/1
Related Products
R978918107
$1,747.00 USD
R900967896
$1,195.00 USD
R900969017
$658.00 USD
R900924843
$1,681.00 USD
R900434143
$1,292.00 USD
