DZ6DP2-5X/25X
Manufacturer: Bosch Rexroth
Material #: R900583735
Model : DZ6DP2-5X/25X
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth DZ6DP2-5X/25X (R900583735) is a direct-operated pressure sequence valve designed for precise control in hydraulic systems. This model ensures the pressure-dependent connection of secondary systems by setting the sequencing pressure via an adjustable component. The valve features a compression spring that maintains the control spool in its initial position, creating a blockage until the pressure in channel P reaches the desired threshold. Once this set value is met, the control spool shifts to enable flow from P to A, allowing the connected system to engage without pressure drop.
The internal design of this valve allows for either internal or external control signal reception through channel P or port BX, respectively. It also accommodates different methods for leakage oil discharge: externally via port TY or internally through A, with the caveat that internal discharge raises the set cracking pressure due to channel A's influence.
For those requiring a check valve for free hydraulic fluid return flow from A to P, this model can be optionally fitted with one. Additionally, it includes a pressure gauge connection for monitoring sequencing pressure directly at the valve.
The DZ6DP2-5X/25X is engineered for subplate mounting and conforms to DIN form A standards without locating holes as well as ISO standards with locating holes. Customers must order subplates separately and can choose from various optional adjustment types such as rotary knobs (with or without scales), threaded pins with hexagon and protective cap, and lockable rotary knobs with scales.
This robust valve supports maximum operating pressures up to bar and can handle maximum flow rates of l/min. Its size and component series X denote its capacity for handling demanding applications while ensuring reliability and performance consistency in hydraulic operations.
$860.00 USD
More are expected on April 16, 2025
Status: This product is temporarily out of stock.
Qty: Delivered as early as April 16, 2025 when ordered in
This product is eligible for factory repair.
Valve type DZ 6 DP is a direct operated pressure sequence valve. It is applied for pressure-dependent connection of a second system. The sequencing pressure is set via the adjustment type (4).
The compression spring (3) holds the control spool (2) in initial position, the valve is blocked. The pressure in channel P is applied via the control line (6) at the spool face of the control spool (2) opposite the compression spring (3).
If the pressure in channel P reaches the set value of the compression spring (3), the control spool (2) is moved to the left and the connection from P to A is opened. The system connected to channel A is connected without a pressure drop in channel P.
The control signal is received internally via the control line (6) from channel P or externally via port B (X).
Depending on the use of the valve, leakage oil discharge is realized externally via port T (Y) or internally via A.
Attention!
With internal leakage oil discharge, the set cracking pressure is increased by the pressure in channel A.
A check valve (5) can be optionally installed for free hydraulic fluid return flow back from channel A to channel P.
A pressure gauge connection (1) enables control of the sequencing pressure at the valve.
Type DZ 6 DP1–5X/…
Type DZ 6 DP1–5X/.XYM…
(measured with HLP46, ϑOil = 40 ±5 °C)
Δp-qV characteristic curves
Δp-qV characteristic curves
The characteristic curves apply for outlet pressure = zero in the entire flow range!
Version "no code"
Version “X"
Version “Y”
Version “XY"
Dimensions in mm
|
1 |
Name plate |
|
2 |
Adjustment type "1" |
|
3 |
Adjustment type "2" |
|
4 |
Adjustment type "3" |
|
5 |
Adjustment type "7" |
|
6 |
Dimensions required to remove the key |
|
7 |
Valve mounting bores |
|
8 |
Lock nut SW24 |
|
9 |
Hexagon SW10 |
|
10 |
Identical seal rings for ports A, B(X), P, T(Y) |
|
11 |
Pressure gauge connection G1/4; 12 mm deep; internal hexagon SW6 |
|
12 |
Without check valve |
|
13 |
With check valve |
|
14 |
Porting pattern according to DIN 24340 form A (without locating hole), or ISO 4401-03-02-0-05 (with locating hole for locking pin ISO 8752-3x8-St, material no. R900005694, separate order) |
Subplates (separate order)
(without locating hole)
G 341/01 (G1/4)
G 342/01 (G3/8)
G 502/01 (G1/2)
(with locating hole)
G 341/60 (G1/4)
G 342/60 (G3/8)
G 502/60 (G1/2)
Valve mounting screws (separate order)
4 hexagon socket head cap screws
ISO 4762 - M5 x 50 - 10.9-flZn-240h-L
Friction coefficient µtotal = 0.09 to 0.14,
Tightening torque MA = 7 Nm ± 10 %,
material no. R913000064
Pipe thread (G..) according to ISO 228/1
Related Products
R978901801
$385.00 USD
R900911879
$1,841.00 USD
R901037585
$709.00 USD
R900957029
$512.00 USD
R978891865
$1,457.00 USD
