DR6DP1-5X/25Y/12
Manufacturer: Bosch Rexroth
Material #: R900424292
Model : DR6DP1-5X/25Y/12
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth DR6DP1-5X/25Y/12 (R900424292) is a direct operated pressure reducing valve designed for subplate mounting with a way version, which means it is capable of limiting the system pressure in the secondary circuit. The secondary pressure can be precisely set using various adjustment types such as a rotary knob, threaded pin with hexagon and protective cap, lockable rotary knob with scale, or a rotary knob with scale. This model features an open initial position allowing hydraulic fluid to flow from channel P to channel A without restrictions while maintaining the set pressure at a constant level through its control spool mechanism.
The valve's operation involves internal signal and pilot oil coming via the control line from channel A. An increase in pressure due to external force on the actuator causes the control spool to move against the compression spring, connecting channel A to channel TY through the control edge on the spool. This action discharges enough hydraulic fluid into the tank to prevent any significant increase in pressure.
Leakage oil discharge from the spring chamber is always directed externally via channel TY. The design also provides for optional installation of a check valve for free flow back from channel A to channel P. Additionally, there's a provision for a pressure gauge connection for monitoring secondary pressure.
This model adheres to DIN form A and ISO porting patterns with an optional locating hole and offers various adjustment types for user convenience. It has specific size and component series designations, maximum operating pressures, and flow rates that ensure it meets rigorous operational standards. The Bosch Rexroth DR6DP1-5X/25Y/12 valve is engineered for reliable performance in controlling system pressures within hydraulic circuits.
$702.00 USD
More are expected on May 28, 2025
Status: This product is temporarily out of stock.
Qty: Delivered as early as May 28, 2025 when ordered in
This product is eligible for factory repair.
The valve type DR 6 DP is a direct operated pressure reducing valve in 3-way version, i. e. with pressure limitation of the secondary circuit.
It is used to limit a system pressure. The secondary pressure is set via the adjustment type (4)
The valve is open in initial position. Hydraulic fluid can flow from channel P to channel A without restrictions. The pressure in channel A is simultaneously applied via the control line (6) at the piston area opposite the compression spring (3). If the pressure in channel A exceeds the value set at the compression spring (3), the control spool (2) moves to control position and keeps the set pressure in channel A at a constant level.
Signal and pilot oil come internally via the control line (6) from channel A.
If the pressure in channel A increases further due to an external force effect at the actuator, it pushes the control spool (2) even further against the compression spring (3).
In this way, channel A is connected to channel T(Y) via the control edge (8) at the control spool (2). So much hydraulic fluid is discharged into the tank that the pressure can only increase slightly.
The leakage oil discharge from the spring chamber (7) is always effected externally via channel T(Y).
For the free flow back from channel A to channel P, a check valve (5) can optionally be installed.
A pressure gauge connection (1) allows for the control of the secondary pressure.
Type DR 6 DP1-5X/.Y…
(measured with HLP46, ϑOil = 40 ±5 °C)
pA-qV characteristic curves
pA-qV characteristic curves
Notice!
The curve development is maintained if the pressure is set lower according to the pressure rating.
The characteristic curves apply to the pressure at the valve output p = 0 bar across the entire flow range.
Δp-qV characteristic curves
Δp-qV characteristic curves
|
1 |
P to A (minimum pressure differential) |
|
2 |
A to T(Y) (minimum pressure differential) |
|
3 |
Δp only via check valve |
|
4 |
Δp via check valve and fully opened control cross-section |
Version "M"
Without check valve
Version "no code"
With check valve
Dimensions in mm
Dimensions in mm
|
1 |
Name plate |
|
2 |
Adjustment type "1" |
|
3 |
Adjustment type "2" |
|
4 |
Adjustment type "3" |
|
5 |
Adjustment type "7" |
|
6 |
Space required to remove the key |
|
7 |
Valve mounting bores |
|
8 |
Lock nut SW24 |
|
9 |
Hexagon SW10 |
|
10 |
Identical seal rings for ports A, B, P, T (Y) |
|
11 |
Pressure gauge connection G1/4; 12 mm deep; internal hexagon SW6 |
|
12 |
Without check valve |
|
13 |
With check valve |
|
14 |
Port B without function |
|
15 |
Porting pattern according toISO 4401-03-02-0-05 (with locating hole for locking pin ISO 8752-3x8-St, material no. R900005694, separate order) |
Subplates (separate order)
(without locating hole)
G 341/01 (G1/4)
G 342/01 (G3/8)
G 502/01 (G1/2)
(with locating hole)
G 341/60 (G1/4)
G 342/60 (G3/8)
G 502/60 (G1/2)
Valve mounting screws (separate order)
4 metric hexagon socket head cap screws
ISO 4762 - M5 x 50 - 10.9-flZn-240h-L
at friction coefficient μtotal = 0.09 to 0.14,
tightening torque MA = 7 Nm] ± 10% ,
material no. R913000064
4 hexagon socket head cap screws UNC
10-24 UNC x 2” (on request)
Related Products
R901384563
$4,335.00 USD
R900976981
$721.00 USD
R900495420
$790.00 USD
R901359695
$509.00 USD
R900753678
$1,030.00 USD
