BALL RUNNER BLOCK CARBON STEEL KWD-030-FLS-C2-H-1

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth B.RUNNER BLOCK CS KWD-030-FLS-C2-H-1 (R16537232Z) is a high-precision ball runner block designed for linear motion applications requiring utmost accuracy and rigidity. This runner block features an FLS format, indicating a flanged width, long length, and standard height. Constructed from unalloyed steel CS, the runner block is engineered for high accuracy (class H) and medium preload (class C), ensuring consistent performance without the use of a ball chain. The product is pre-lubricated with Roller bearing grease Dynalub, which along with its design allows for long-term lubrication over several years. The B.RUNNER BLOCK CS does not include attachment elements on either front reference edge but does offer a straight lube connection that is loosely attached. Its overall length is specifically designed to ensure interchangeability between the runner block and guide rails across every accuracy level. This ball runner block stands out due to its ability to handle demanding rigidity requirements while maintaining significantly reduced frictional oscillations and low friction levels, especially under external loads. The patented entry zone enhances travel accuracy by up to six times compared to standard designs. It boasts high torque load capacity, various preload classes, and exceptional rigidity in all loading directions, which allows for single runner block applications per rail. Additional features include improved rigidity under lift-off and side loading conditions thanks to two extra mounting screw holes at the center of the runner block. Maximum system rigidity is achieved through a preloaded O-arrangement. For applications requiring precise measurements, an optional integrated inductive and wear-free measuring system is available. The B.RUNNER BLOCK CS can be mounted with attachments from both above and below and is compatible with all SN/SNO ball guide rails. It offers high load ratings in all four main directions of loading and comes factory prelubricated for immediate use. The product also includes an integrated all-around sealing system for protection against contaminants, ensuring durability and longevity in various working environments.