BALL RUNNER BLOCK CARBON STEEL KWD-035-FLS-C3-X-1

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth B.RUNNER BLOCK CS KWD-035-FLS-C3-X-1 (R165333822) is a state-of-the-art ball runner block designed for linear motion applications requiring high precision and rigidity. This product is part of the Ball Rail Systems from Bosch Rexroth, featuring a size 35 flanged long standard height (FLS) runner block body made of unalloyed steel CS. It offers exceptional accuracy with an extra precision (XP) class and a high preload class C, ensuring reduced frictional oscillations and low friction force levels, especially under external load conditions. The B.RUNNER BLOCK CS KWD-035-FLS-C3-X-1 incorporates a ball chain that facilitates smooth and quiet travel behavior while providing maximum precision. The patented entry zone significantly increases travel accuracy up to six times, enhancing the overall performance of the system. The runner block is pre-lubricated at the factory with roller bearing grease Dynalub 510 for extended service life without frequent maintenance. Designed to withstand high torque loads, this ball runner block can be used in applications with just one runner block per rail due to its high rigidity in all load directions. It features additional mounting screw holes at the center for improved rigidity under lift-off and side loading conditions. The overall length of the runner block is meticulously crafted to ensure interchangeability with guide rails across every accuracy level. Additionally, this model includes an integrated all-around sealing system for protection against contaminants and offers various sealing options such as standard seal SS, low-friction seal LS, double-lip seal DS, front seal, FKM seal, and cover plate wiper based on specific environmental requirements. Attachments can be mounted from both above and below the runner block body. This Bosch Rexroth ball runner block is suitable for use on all SNS/SNO ball guide rails and maintains consistent load ratings in four main loading directions. Its dynamic characteristics make it ideal for applications demanding maximum system rigidity and long-term reliability in challenging operational environments.