BALL RUNNER BLOCK CARBON STEEL KWD-015-FLS-C2-H-1

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth B.RUNNER BLOCK CS KWD-015-FLS-C2-H-1 (R165312320) is a high-precision ball runner block designed for linear motion applications requiring exceptional accuracy and rigidity. This component is part of the Ball Rail Systems product line, specifically tailored for dynamic and high-load scenarios. The runner block body is constructed from unalloyed steel CS, ensuring durability and strength. With a size designation of FLS, this model features a flange width, long length, and standard height configuration. It boasts a medium preload class C and an accuracy class H, indicative of its high precision capabilities. Notably, this model does not include a ball chain but comes with initial lubrication and preservation for ease of use right out of the box. The B.RUNNER BLOCK CS KWD-015-FLS-C2-H-1 is equipped with roller bearing grease Dynalub 510 for reliable performance and has straight lube connections that are loosely attached. Its design allows for interchangeability with guide rails across all accuracy levels, enhancing its versatility in various applications. This ball runner block excels in environments demanding minimal frictional oscillations and low friction force levels, especially under external loads. It features an integrated all-around sealing system to protect against contaminants while maintaining high torque load capacity. The product also supports long-term lubrication options for years of service without frequent maintenance. For applications requiring just one runner block per rail, this model offers improved rigidity under lift-off and side loading conditions thanks to additional mounting screw holes at the center. It also provides maximum system rigidity due to its preloaded O-arrangement design. Furthermore, the B.RUNNER BLOCK CS KWD-015-FLS-C2-H-1 can be used on all SNS/SNO Ball Guide Rails and supports attachments from both above and below the block, enhancing its adaptability across various installation scenarios. With its factory pre-lubrication and robust construction, it ensures maximum precision in operation while supporting a wide range of ambient temperatures from minimum to maximum degrees Celsius as specified in the detailed product specifications.