BALL RUNNER BLOCK CARBON STEEL KWD-015-FLS-C1-P-1

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth B.RUNNER BLOCK CS KWD-015-FLS-C1-P-1 (R16531122Z) is a high precision ball runner block designed for linear motion applications requiring utmost accuracy and rigidity. This component is part of the CS series, made from unalloyed steel and engineered to deliver exceptional performance with its FLS format, which denotes a flanged width, long length, and standard height. The runner block features low preload (Preload class C) and precision accuracy (Accuracy class P), ensuring smooth motion and high reliability without the use of a ball chain. The B.RUNNER BLOCK CS has an overall length of . mm and comes pre-lubricated with Roller bearing grease Dynalub to ensure long-term lubrication over several years. It boasts a straight lube connection that is loosely attached for easy maintenance. The product is designed with interchangeability in mind, allowing it to be combined with guide rails of every accuracy level, catering to the most demanding rigidity requirements. This runner block's design significantly reduces frictional oscillations and maintains a low friction force level even under external loads. It offers excellent dynamic characteristics including maximum precision due to its patented entry zone which can increase travel accuracy by up to six times. The product also features integrated all-around sealing for protection against contaminants and has high torque load capacity with different preload classes available. Additional attributes include the ability to withstand high rigidity in all load directions, permitting applications with just one runner block per rail. Enhanced rigidity under lift-off and side loading conditions are ensured by two additional mounting screw holes at the center of the ball runner block. For those requiring an integrated measuring system, this model can optionally include an inductive and wear-free option. The Bosch Rexroth B.RUNNER BLOCK CS KWD-015-FLS-C1-P-1 is capable of being mounted from both above and below on SN/SNO ball guide rails while offering the same high load ratings in all four main directions of loading. It comes without attachment elements on either front reference edge but allows for end-face fastening thread for all attachments. This model's ambient temperature range is specified from min ... max °C for short periods; however, users should consult for operations at negative temperatures.