BALL RUNNER BLOCK RESIST CR KWD-030-SLH-C1-H-1

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth B.RUNNER BLOCK CR KWD-030-SLH-C1-H-1 (R162471370) is a state-of-the-art linear motion component designed for precision and rigidity in confined spaces. This ball runner block, belonging to the SLH series, is notable for its slimline width, long length, and high height format. It features a Resist CR coating for superior corrosion resistance and a matt-silver hard chrome-plated runner block body made from unalloyed steel CS. The product is classified with a low preload (Preload class C) and high accuracy (Accuracy class H), ensuring precise motion control without the inclusion of a ball chain. The B.RUNNER BLOCK CR is pre-lubricated with Roller bearing grease Dynalub to provide long-term lubrication and maintenance-free operation over several years. It boasts excellent dynamic characteristics with very high torque load capacity and can handle the same high load ratings in all four main loading directions. The design facilitates end-face fastening threads allowing attachments to be mounted from above. With its patented entry zone, the runner block significantly increases travel accuracy by up to six times. It has an overall length of . mm and is compatible with size E profiled rail systems, ensuring interchangeability with guide rails of every accuracy level. The maximum permissible ambient temperature ranges from min ... max °C for short periods, while the dynamic load capacity C and other load moments are determined as per DIN ISO standards. This product is ideal for applications requiring high rigidity, maximum precision, reduced frictional oscillations, low friction force levels under external loads, and corrosion resistance. Its self-aligning capability allows for compensation of misalignments without self-alignment. Additionally, it comes without seals but options like standard seal SS or low-friction seal LS can be acquired separately if needed for protection against contaminants such as dirt or metal particles.