CLAMPING PIECE 25-145

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth CLAMPING PIECE (R117529044) is a mechanical accessory designed for use with linear axes, specifically tailored to enhance the functionality and stability of linear motion systems. As part of the product group ID 25-145, this clamping piece is engineered to provide secure fastening and precise alignment for various types of linear modules. It features a robust design with an outer diameter (Size D) that ensures compatibility with corresponding components. The clamping piece has been optimized for nominal size MKR and comes with a set number of bores (N), which are critical for mounting purposes. The tightening torque of the fixing screws is specified to match the friction factor and strength class requirements, ensuring a reliable connection without compromising the integrity of the system. Size A, Size H, Size E, and Size B are meticulously crafted to fit seamlessly into the intended linear module configuration. For optimal performance, it is recommended to use a certain number of clamping fixtures depending on the type and size of the linear module in use. For instance, Type 1 requires "pieces per side m," Type 2 specifies "pieces per side m," and Type 3 indicates "pieces per side m." For larger linear modules sized "and up," it's advised to employ "per meter and side" to maintain system stability. The weight specification of this clamping piece has been carefully considered to ensure it does not add excessive mass to the assembly while still maintaining its structural integrity. The tightening torque for fastening screws is also provided to facilitate proper installation. This Bosch Rexroth CLAMPING PIECE is an essential component for users seeking reliable mechanical support in their linear motion setups, ensuring that their systems operate smoothly while minimizing potential misalignments or disruptions due to inadequate fixture strength or improper installation.