SHAFT SUPPORT BLOCK WBG-12F

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth SHAFT SUPPORT BLOC WBG-12F (R105601200) is a robust component designed to provide stable support for linear motion systems. This shaft support block is crafted from lamellar graphite cast iron, known for its durability and strength, ensuring a reliable foundation for the supported shaft. With a flange material also made of gray cast iron, the WBG-12F offers an efficient alternative to custom-made bores by allowing shafts to be precisely aligned, which helps in preventing linear bushings from overloading due to non-parallel shafts. The design of the WBG-12F incorporates a side clamping screw that facilitates easy installation and quick alignment of the system. It is engineered with a precise design that includes a reference edge, which simplifies the setup process and enhances accuracy. This feature makes it more cost-effective than developing in-house designs. Intended for use with linear bushing and shaft systems, the Bosch Rexroth SHAFT SUPPORT BLOC WBG-12F is part of the company's extensive range of accessories for linear bushings. The housing material's cast iron composition adds to the overall weight and stability of the block, ensuring that it remains firmly in place during operation. Overall, this shaft support block represents a practical solution for those seeking high-quality components for their linear guide setups. Its thoughtful engineering underscores Bosch Rexroth's commitment to producing parts that are not only easy to install but also provide precise alignment capabilities and long-lasting performance.