This product is not available. CLICK HERE to create a support ticket for us to locate your part or a suitable replacement
| For particularly high demands with a very long service life under rolling loads. |
| Data Sheet | Download Data Sheet |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Mill-cut length L | 6100 |
| Version of precision steel shaft | Vollwelle |
| Productgroup ID | 17 |
| Maximum usable length Lmax | 5900 |
| Tolerance grade footnote | Other tolerances upon request |
| Footnote Lmax | Sections are combined for longer overall lengths. Linear bushings can simply be rolled over joints. |
| Material of precision steel shafts | Heat-treated steel Cf53 |
| Mass m (kg/m) | 12.41 |
| Footnote length L | Regarding geometry and hardness |
| Tolerance grade shaft | h6 |
| Hardness | min. 60 |
| Cylindricity tolerance t2 footnote | Measurement of differences in diameter |
| Cylindricity tolerance t2 | 11 |
| Shaft diameter d | 45 |
| Roundness tolerance t1 | 7 |
| Linear guide type | Linear bushing and shaft |
| Filter for linear bushings and shafts | Precision steel shafts |
| Surface roughness RA | 0.32 |
| Depth of hardness (min.) | 1.5 |
| Straightness tolerance t3 footnote | The smallest possible value is 40 µm for lengths under 1 m. Straightness is measured based on ISO 13012. |
| Straightness tolerance t3 | 100 |
| Weight | 0 |
$3.76 USD
$339.12 USD
$441.58 USD
$954.61 USD
$54.93 USD
Contact us below:
