This product is not available. CLICK HERE to create a support ticket for us to locate your part or a suitable replacement
| Rugged all-metal design with steel ball retainer for harsh environments and heavy contamination |
| Many pockets acting as lubricant reservoirs for extended lubrication intervals or lubrication for life |
| Seal-free and with steel ball retainers for temperatures well above 80°C or under vacuum |
| With locating hole for axial and radial securing (no locating hole for shaft diameters 12 and 16) |
| Optional integrated wiper seals |
| For use in woodworking, foundries, cement plants |
| Pockets collect any dirt that may have worked its way in to prevent the linear bushing from jamming. |
| No wiper seals, come with integrated steel retaining rings; higher temperatures allowed with shaft diameters 12 and higher |
| Hardened and ground outer sleeve |
| Steel ball retainer |
| Balls made of rolling bearing steel |
| Data Sheet | Download Data Sheet |
| 2D CAD | Download 2D CAD |
| 2D CAD | Download 2D CAD |
| 3D CAD | Download 3D CAD |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Rows of balls | 4 |
| Series | Standard (metal) |
| Footnote friction force FR | One wiper seal: Multiply value with factor 0.5 |
| Size C1 H13 | 31.2 |
| Footnote permissible ambient temperature (min ... max) | Only unsealed linear bushings with steel ball retainers may be used at higher temperatures. Make allowance for reductions in load capacity. |
| Footnote dynamic load capacity C | The load capacities C and C0 apply for the main direction of loading. |
| Max. acceleration amax | 100 |
| Footnote friction coefficient μ | Friction coefficients of unsealed linear bushings when lubricated with oil. The friction coefficient is lowest under heavy load, but can still be above the specified value even under a low load. |
| Permissible ambient temperature | -10 °C ... +80 °C |
| Size E | 10 |
| Outer diameter D | 32 |
| Breakaway force | 16 |
| Maximum permissible linear speed vmax | 2.5 |
| Size D | 32 |
| Size D1 | 30.5 |
| Friction coefficient μ | 0,001 ... 0,004 |
| Footnote static load capacity C0 | The load capacities C and C0 apply for the main direction of loading. |
| Static load rating C0 | 970 |
| Size C h12 | 45 |
| Size C2 | 1.6 |
| Friction coefficient μ max. | 0.004 |
| Friction force | 6 |
| Friction coefficient μ min. | 0.001 |
| Productgroup ID | 17 |
| Permissible ambient temperature (max) | |
| Angle α | 60 |
| Permissible ambient temperature (min) | |
| Friction force FR footnote 2 | Frictional drags generated by linear bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. |
| Footnote breakaway force | One wiper seal: Multiply value with factor 0.5 |
| Shaft diameter d | 20 |
| Linear guide type | Linear bushing and shaft |
| Filter for linear bushings and shafts | Linear bushings |
| Format of linear bushings | O – Open |
| Dynamic load capacity C | 1280 |
| Weight | 0.082 |
| Size D1 with tolerance | 30.5 mm |
| Radial clearance shaft h6/bore K7 | |
| Radial clearance shaft/bore h6/H7 |
$235.18 USD
$524.70 USD
$34.10 USD
$1,029.23 USD
$7.48 USD
Contact us below:
