WEDGE CHAIN 90+ 3L L2898

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth WEDGE CHAIN 90+ 3L L2898 (3842546087) is an advanced conveyor chain solution designed for the secure clamping and transport of products across varying heights and distances. This particular model is tailored to handle items that cannot be moved vertically on standard conveyors due to their design, are unable to go up steep gradients with other chains because of their center of gravity, have surfaces that are sensitive to damage from lateral or upper guides, must not slip during vertical transport, or need to be moved without synchronization. The WEDGE CHAIN 90+ 3L L2898 stands out for its remarkably quiet operation, a result of its patented chain design. The product group ID denotes its category in the Bosch Rexroth catalog, while the packaging unit specifies how it is sold. The length L and weight specifications detail the size and heft of the chain. This model comes fully assembled, including the chain pin and jointed bolts necessary for immediate use. It is crafted from high-quality materials: POM for the chain link, TPE plates with a Shore hardness A rating for flexibility and durability, non-rusting steel for the chain pin, and PA for the pivot pin. The WEDGE CHAIN 90+ 3L L2898 is only suitable for dry operations and offers two versions with lamellae L—one for pressure-insensitive products and another for pressure-sensitive items. Assembly and disassembly require an additional module due to the intricate design of this conveyor chain. It's important to note that this product should not be used for transporting sharp-edged objects. Furthermore, it meets EU regulations as well as FDA CFR standards, ensuring compliance with safety requirements in various applications. However, accumulation operation is not allowed with this model, and there's a maximum tensile force specified by Bosch Rexroth that should not be exceeded to maintain integrity during use.