SAFETY COVER TS5-OC 260

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth SAFETY COVER TS5-OC 260 (3842545575) is a critical safety component designed for use with conveyor systems. This product includes protective covers and end plates that are essential for maintaining safety in working areas around conveyors. The protective covers are tailored to fit various roller spacings, and there are special covers available for the conveyor section center, transitions, and ends. Additionally, the end plates C are designed to be placed at the operator side E, either left or right, and passive operator side F, also available for both sides. These components ensure that the ends of conveyor sections are safely covered to prevent accidents. The SAFETY COVER TS5-OC 260 also comes with thread forming screws G, which are required to secure each end plate EF in place. To further enhance stability and safety, spring elements H are included and necessary for each end plate installation. Moreover, end caps K and L serve as cover caps for the open profile ends of the conveyor sections. Constructed from steel with a galvanized finish to ensure durability and longevity, these components meet high-quality standards. The packaging unit includes all necessary parts for installation except for screw DIN EEMX. G and lateral guide cover screws which need to be sourced by the customer. The product's design not only increases safety but also contributes to maintaining a clean aesthetic by covering exposed profiles and edges. It is important to note that walking on these protective covers or end plates is strictly prohibited to maintain their structural integrity and effectiveness as a safety measure.