CROSS-CONNECTOR VG-311

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth CROSS-CONNECTOR VG-311 (3842533306) is an integral component designed for robust and efficient assembly in various conveyor systems. This cross connector is specifically tailored for use with tube D48.3, providing a secure and stable connection point for conveyor structures. The VG-311 boasts an easy-to-clean design featuring draining surfaces that facilitate maintenance and uphold hygiene standards, particularly important in environments where cleanliness is paramount. Constructed to minimize the complexity of assembly, the CROSS-CONNECTOR VG-311 requires few screwed connections, streamlining the installation process. Its design includes 10 mm profile slots within the workpiece pallet frame, allowing for simple attachment of workpiece supports. These supports can be utilized alongside AL sections to enhance versatility. The product's design incorporates clever details that enable quick and effortless adjustment of leg sets, enhancing adaptability to various setup requirements. Additionally, Bosch has equipped the underside of this cross connector with drilling aids intended to assist in accurately doweling leveling feet. In terms of support structure compatibility, the CROSS-CONNECTOR VG-311 can be used with both aluminum and stainless steel systems. It is engineered to handle varying speeds, accumulation behaviors, and weights in conveyor setups by ensuring that supports are appropriately spaced at intervals of approximately 2-3 meters. Moreover, this Bosch cross connector facilitates the direct connection to strut profiles measuring 60x60 as well as S12x30-T50 components. When used in conjunction with feet types B and C, cross reinforcements are mandatory due to stability considerations. The VG-311 also accommodates ascending and descending conveyor sections up to a tilt angle of 28° based on the returning chain configuration. Overall, the Bosch CROSS-CONNECTOR VG-311 is a versatile and essential element designed for ease of use and maintenance in complex conveyor systems while ensuring structural integrity and adaptability across various applications.