This product is not available. CLICK HERE to create a support ticket for us to locate your part or a suitable replacement
| Slide bearings for high loads |
| Long service life |
| Port connections: flanged or threaded |
| Consistent high quality based on large-volume production |
| Drive shafts according to ISO or SAE and customer specific solutions |
| Offer Drawing | Download Offer Drawing |
| Data Sheet | Download Data Sheet |
| 3D CAD | Download 3D CAD |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Rear cover | Standard |
| Maximum rotational speed | 5000 |
| Productgroup ID | 7,21,22,23,24,25 |
| Size (geometric displacement) | 2 |
| Sealing material | NBR, shaft seal in FKM |
| Version | Corrosion resistant, pinned |
| Special version | Deviations from catalogue standards, see drawing |
| Noise level | Standard noise level |
| External gear unit | External Gear Unit |
| Application | general |
| Drive shaft | Straight shaft SAE J744 13-1 |
| Housing material | Aluminum |
| Line connection | Thread UN-2B, SAE O-Ring |
| Series | Model B (0.84 ... 10 cm³/rev) |
| Front cover | 2-bolt flange SAE J744 50-2 (A-A) |
| Maximum intermittent pressure | 250 |
| Direction of rotation | Clockwise rotation |
| Unit version | Bearing diameter 12mm |
| External gear unit function | Pump |
| Weight | 1.2 |
| Max. flow | 10.0 |
$668.00 USD
$864.00 USD
$329.00 USD
$754.00 USD
$985.00 USD
Contact us below:
