AXIAL-PISTON PUMP A A10VSO 28 DFR1/31R-VPA12N00

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth A10VSO 28 DFR1/31R-VPA12N00 (R910916805) is a high-performance axial piston unit designed to operate in open circuit systems. It features a variable displacement mechanism with a swashplate design, allowing for precise control of flow proportional to the drive speed and displacement. The pump is capable of stepless flow adjustment through the swash plate angle, ensuring efficient operation for various applications. With an emphasis on reliability and durability, this model boasts low operating noise and an extended service life. Its short control times are attributed to controls with rapid response times, enhancing the overall performance of hydraulic systems. The A10VSO 28 DFR1/31R-VPA12N00 has excellent suction characteristics, minimizing the risk of cavitation and ensuring consistent operation. This particular model does not include a through-drive option but maintains the capability to support additional pump mounting up to the same nominal size if required. It has been designed with leakage and drain ports that facilitate maintenance and enhance operational efficiency. The unit's working ports feature B flange metric connections, while its mounting flange conforms to ISO standards with a metric four-hole pattern. The A10VSO 28 DFR1/31R-VPA12N00 operates with a clockwise rotation when viewing from the shaft end and uses FKM standard sealing material for resistance against various fluids. It is equipped with an ISO shaft key and employs a DR F controller XT plugged for actuation control. This standard version of the pump is engineered without internal drain lines or connectors for solenoids, streamlining its design for specific application requirements. With nominal pressure at 280 bar and maximum pressure reaching up to 350 bar, this all-purpose medium-pressure pump is suitable for a wide range of operational demands in various hydraulic systems.