PRESSURE SWITCH HED 8 OH-2X/350K14
Manufacturer: Bosch Rexroth
Material #: R901101640
Model : HED 8 OH-2X/350K14
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth HED 8 OH-2X/350K14 (R901101640) is a high-quality piston type hydraulic pressure switch designed for monitoring and controlling the pressure in hydraulic systems. It features a robust housing and a micro switch with NC/NO contact function, capable of potential-free switching of currents ranging from mA to 0.5A. The device offers small hysteresis and high repetition accuracy, less than 1% of the set pressure, ensuring precise operation.
This model is equipped with NBR seals suitable for hydraulic fluids such as HL, HLP, HLPD, HVLP, and HVLPD. It has a flange connection according to ISO standards and can be used as a subplate mounting or pipeline installation component or stacked vertically with sandwich plates. The pressure switch comes with various adjustment types including spindles with or without protective caps, rotary knobs (lockable or not), all designed to accommodate different user preferences and applications.
The electrical connection is made through a large cubic connector DIN EN without mating connector included. It operates within a supply voltage range of 24 to 240 V AC/DC and conforms to CE, CCC, UL, and RoHS standards. With its maximum operating pressure of 350 bar and adjustable pressure ratings (50, 100, 200, 250, and 315 bar), this component series X is versatile for different system requirements.
To ensure longevity and reliability of the HED 8 OH-2X/350K14 pressure switch, it should be installed in an environment with minimal vibrations and protected from hydraulic shocks. This unit is recognized as an UL component for certain pressure ranges up to 315 bar and also holds CCC certification. Its weight stands at approximately .60 kg which contributes to its sturdy yet manageable build for various industrial applications.
$487.00 USD
Availability: 13 In Stock
Available for immediate shipment
Qty: Delivered as early as April 26, 2024 when ordered in
This product is eligible for factory repair.
350 bar, micro switch with NC contact/NO contact function, device connector DIN EN 175301-803 (large cubic connector)
Potential-free switching of currents from 1 mA to 2.0 A. Small hysteresis, depending on the set switching point. High repetition accuracy < 1% of the set pressure
Unpacked Weight: 0.556601 kg
The hydro-electric pressure switch type HED 8 is a piston type pressure switch. It basically comprises of housing (1), installation kit with piston (2), compression spring (3), adjustment element (4) and micro switch (5).
If the pressure to be monitored is below the set value, the micro switch (5) is operated. The pressure to be monitored is applied via the nozzle (7) at the piston (2). The piston (2) is supported by the spring plate (6) and acts against the continuously adjustable force of the compression spring (3). The spring plate (6) transmits the movement of the piston (2) onto the micro switch (5) and releases the latter when the set pressure is reached. This switches the electric circuit on or off, depending on the circuit set-up. The mechanical positive stop of the spring plate (6) protects the micro switch (5) in case of a sudden pressure drop from mechanical destruction and, in case of overpressure, prevents solid compression of the compression spring (3).
Notices:
In order to increase the life cycle, the pressure switch should be mounted with low vibrations and protected from hydraulic pressure surges.
Type HED 8 OH-2X/…K14
Type HED 8 OH-2X/…K14S
Type HED 8 OP-2X/…K14A
Type HED 8 OP-2X/…K14AS
Type HED 8 OA-2X/…K14KW
Type HED 8 OA-2X/…K14KS
The hydro-electric pressure switch type HED 8 is a piston type pressure switch. It basically comprises of housing (1), installation kit with piston (2), compression spring (3), adjustment element (4) and micro switch (5).
If the pressure to be monitored is below the set value, the micro switch (5) is operated. The pressure to be monitored is applied via the nozzle (7) at the piston (2). The piston (2) is supported by the spring plate (6) and acts against the continuously adjustable force of the compression spring (3). The spring plate (6) transmits the movement of the piston (2) onto the micro switch (5) and releases the latter when the set pressure is reached. This switches the electric circuit on or off, depending on the circuit set-up. The mechanical positive stop of the spring plate (6) protects the micro switch (5) in case of a sudden pressure drop from mechanical destruction and, in case of overpressure, prevents solid compression of the compression spring (3).
Notices:
In order to increase the life cycle, the pressure switch should be mounted with low vibrations and protected from hydraulic pressure surges.
Type HED 8 OH-2X/…K14
Type HED 8 OH-2X/…K14S
Type HED 8 OP-2X/…K14A
Type HED 8 OP-2X/…K14AS
Type HED 8 OA-2X/…K14KW
Type HED 8 OA-2X/…K14KS
Switching pressure differential (measured with HLP46, ϑOil = 40 ±5 °C)
Pressure rating 50 bar
Pressure rating 100 bar
Pressure rating 200 bar
Pressure rating 350 bar
Pressure rating 630 bar
Notices:
The switching pressure differential may increase within the course of the life cycle due to the deterioration of the oil quality and the number of load cycles.
|
"K14" without indicator light |
"K14" with indicator light |
"K35" |
|
|
|
|
Switching function Terminals 1-2: In case of pressure increase, contact opens Terminals 1-3: In case of pressure increase, contact closes |
Switching function Terminals 1-2: In case of pressure increase, contact opens Terminals 1-4: In case of pressure increase, contact closes |
|
Notice:
For general information on safety, installation or commissioning, see operating instructions.
Type HED 8 …K14
Dimensions in mm
|
1 |
Adjustment type "KW" |
|
2 |
Adjustment type "KS" |
|
3 |
Adjustment type "–" |
|
4 |
Adjustment type "S" |
|
5 |
Adjustment type "A" |
|
6 |
Adjustment type "AS" |
|
7 |
Seal ring |
|
8 |
Space required to remove the key |
|
9 |
Space required to remove the mating connector |
|
10 |
Hexagon SW27 (with adjustment type "KS") |
|
11 |
Internal hexagon SW10 |
|
12 |
Mating connector without circuitry for connection "K14” (separate order) |
|
13 |
Mating connector with circuitry for connection "K14” (separate order) |
|
17 |
Valve mounting screws (separate order) for type HED 8 OH… 2 hexagon socket head cap screws, metric ISO 4762 - M5 x 55 - 10.9-flZn-240h-L Friction coefficient μtotal = 0.09 to 0.14, Tightening torque MA = 6+0.5 Nm, Material no. R913000261
|
|
18 |
Maximum diameter of the connection bore of the counterpart (type HED 8 OH…) |
|
19 |
Maximum diameter of the connection bore of the counterpart (type HED 8 OP…) |
|
20 |
Valve mounting screws (separate order) for type HED 8 OA… and …OP… 2 hexagon socket head cap screws, metric ISO 4762 - M5 x 50 - 10.9-flZn-240h-L Friction coefficient μtotal = 0.09 to 0.14, Tightening torque MA = 7+0.5 Nm, Material no. R913000064 |
Type HED 8 …K35
Dimensions in mm
|
1 |
Adjustment type "KW" |
|
2 |
Adjustment type "KS" |
|
3 |
Adjustment type "–" |
|
4 |
Adjustment type "S" |
|
5 |
Adjustment type "A" |
|
6 |
Adjustment type "AS" |
|
7 |
Seal ring |
|
8 |
Space required to remove the key |
|
9 |
Space required to remove the mating connector |
|
10 |
Hexagon SW27 (with adjustment type "KS") |
|
11 |
Internal hexagon SW10 |
|
14 |
Mating connector for connection "K35" (separate order) |
|
15 |
Mating connector suitable for "K35", angled (separate order) |
|
16 |
Mating connector for connection "K35", with cable (separate order) |
|
17 |
Valve mounting screws (separate order) for type HED 8 OH… 2 hexagon socket head cap screws, metric ISO 4762 - M5 x 55 - 10.9-flZn-240h-L Friction coefficient μtotal = 0.09 to 0.14, Tightening torque MA = 6+0.5 Nm, Material no. R913000261
|
|
18 |
Maximum diameter of the connection bore of the counterpart (type HED 8 OH…) |
|
19 |
Maximum diameter of the connection bore of the counterpart (type HED 8 OP…) |
|
20 |
Valve mounting screws (separate order) for type HED 8 OA… and …OP… 2 hexagon socket head cap screws, metric ISO 4762 - M5 x 50 - 10.9-flZn-240h-L Friction coefficient μtotal = 0.09 to 0.14, Tightening torque MA = 7+0.5 Nm, Material no. R913000064 |
Type HED 8 OH… in vertical stacking NG6
|
1 |
Pressure switch HED 8 OH… for use in stacking assemblies (can be assembled staggered by 4 x 90°) |
|
2 |
Sandwich plate type HSZ 06A... for use of the pressure switch as stacking element |
|
3 |
Space required to remove the key |
|
4 |
Space required to remove the mating connector |
|
Mating connector |
H1 |
H2 |
H3 |
|
Port “K14”, without circuitry |
87 |
65 |
15 |
|
Port “K14”, with circuitry |
92 |
70 |
15 |
|
Port “K35”, angled |
92 |
70 |
10 |
|
Port “K35”, straight |
111 |
89 |
10 |
Type HED 8 OH… in vertical stacking NG10
|
1 |
Pressure switch HED 8 OH… for use in stacking assemblies (can be assembled staggered by 4 x 90°) |
|
2 |
Sandwich plate type HSZ 10A... for use of the pressure switch as stacking element |
|
3 |
Space required to remove the key |
|
4 |
Space required to remove the mating connector |
|
Mating connector |
H1 |
H2 |
H3 |
|
Port “K14”, without circuitry |
100 |
65 |
15 |
|
Port “K14”, with circuitry |
105 |
70 |
15 |
|
Port “K35”, angled |
105 |
70 |
10 |
|
Port “K35”, straight |
124 |
89 |
10 |
Mating connectors for mechanical pressure switches with connector “K14”, without circuitry, standard
4P Z14
Mating connectors for mechanical pressure switches with connector “K14”, without circuitry, standard
4P Z14
For mechanical pressure switches with connector “K14”, according to EN 175301-803 and ISO 4400, 3-pole + PE, “large cubic connector”Data sheet
Spare parts & repair
Mating connectors for mechanical pressure switches with connector “K14”, with indicator lights at connections 2 and 3
4P Z15L
Mating connectors for mechanical pressure switches with connector “K14”, with indicator lights at connections 2 and 3
4P Z15L
For mechanical pressure switches with connector “K14”, according to EN 175301-803 and ISO 4400, 3-pole + PE, “large cubic connector”Data sheet
Spare parts & repair
Mating connectors for sensors and valves with connector “K24”, “K35” and “K72”, M12 x 1
4P Z24
Mating connectors for sensors and valves with connector “K24”, “K35” and “K72”, M12 x 1
4P Z24
For sensors and valves with connector “K24”, “K35” and “K72” Mating connectors M12, 4-pole, line cross-section 0.75 mm2Data sheet
Spare parts & repair
Related Products
R901310678
$1,951.00 USD
R978917126
$4,823.00 USD
R900538904
$3,527.00 USD
R901110444
$487.00 USD
R900539575
$2,965.00 USD
