DREBE6X-1X/75MG24K31F1M

Manufacturer: Bosch Rexroth

Material #: R901084277

Model : DREBE6X-1X/75MG24K31F1M

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth DREBE6X-1X/75MG24K31F1M (R901084277) is a state-of-the-art proportional pressure reducing valve designed for precision control in hydraulic systems. This pilot-operated valve features an advanced design where the main stage is a 3-way version, ensuring reliable operation and effective pressure management at the actuator. The internal pilot oil supply is flow-controlled via port P, which is regulated by the DBV pilot valve. Equipped with a position-controlled proportional solenoid that includes integrated electronics, this valve offers exceptional responsiveness and control. It allows for stepless setting and reduction of pressure in the A actuator, based on the command value input. The position of the solenoid armature relative to the compression spring can be adjusted to fine-tune performance, yielding minimal hysteresis (<1%) and swift actuating times. Safety and reliability are also key features of this model. It includes maximum pressure limitation capabilities to safeguard against potential damage caused by electronic failures. Designed for subplate mounting, it adheres to the ISO 4401 porting pattern standards. This Bosch Rexroth valve has a size 6 component series X, which can withstand a maximum operating pressure of up to 315 bar and facilitates a maximum flow rate of 75 liters per minute. These specifications make it an ideal choice for various applications requiring precise pressure reduction in hydraulic circuits. Whether used in industrial machinery or mobile equipment, this valve ensures consistent performance and robustness for efficient system operation.

$5,339.00 USD

More are expected on September 23, 2024

Add to Cart

Status: This product is temporarily out of stock.

Qty: Delivered as early as September 23, 2024 when ordered in

This product is eligible for factory repair.

Start Repair

Pilot-operated valves with position feedback and integrated electronics for system pressure reduction at the actuator (internal pilot oil supply only) 3-way version Adjustable via the position of the solenoid armature in relation to the compression spring Position-controlled, minimum hysteresis < 1%, short actuating times Maximum pressure limitation, even with defective electronics For subplate mounting: Porting pattern according to ISO 4401

Proportional pressure reducing valves of type DREBE6X are pilot-operated; the main stage is a 3-way version. The pilot control valve (DBV pilot valve) has a flow-controlled internal pilot oil supply via P. It is actuated by a position-controlled proportional solenoid with integrated electronics. Dependent on the command value, the pressure in A (actuator) can be steplessly set and reduced using these valves.

01	02	03	04		05		06	07	08	09	10	11	12
DREB	E	6	X	–	1X	/		M	G24	K31		M	*

01	Proportional pressure reducing valve in 3-way version with inductive position transducer, pilot-operated	DREB
02	With integrated electronics (OBE)	E
03	Size	6
04	Porting pattern according to ISO 4401-03-02-0-05	X
05	Component series 10 ... 19 (10 ... 19: unchanged installation and connection dimensions)	1X
Maximum pressure rating
06	Up to 75 bar	75
	Up to 175 bar	175
	Up to 310 bar	310
07	Without check valve	M
Supply voltage of the control electronics
08	Direct voltage 24 V	G24
Electrical connection
09	Connector according to DIN 43563-AM6 Mating connector separate order	K31
Electrical interface
10	Command value 0 … 10 V	A1
10	Command value 4 to 20 mA	F1
11	NBR seals, suitable for mineral oil HL and HLP according to DIN 51524	M
12	Further details in the plain text	*

For applications outside these parameters, please consult us!

general

Type		DREBE6X
Size		6
Component series		1X
Installation position		any
Weight	kg	3.3
Ambient temperature range	°C	-20 … +50

hydraulic

Type			DREBE6X
Size			6
Maximum operating pressure		bar	315
Maximum operating pressure	Port P	bar	315
Maximum operating pressure	Port T	bar	250
Pilot flow		l/min	≈ 0.6
Maximum flow		l/min	40
Hydraulic fluid temperature range		°C	-20 … +70
Viscosity range		mm²/s	10 … 800
Maximum admissible degree of contamination of the hydraulic fluid, cleanliness class according to ISO 4406 (c) 1)			Class 18/16/13 according to ISO 4406 (c)
Hysteresis 2)		%	≤ 1
Manufacturing tolerance of the command value pressure characteristic curve 2)		%	< ± 5

1)	The cleanliness classes specified for the components must be adhered to in hydraulic systems. Effective filtration prevents faults and simultaneously increases the life cycle of the components. For the selection of the filters, see www.boschrexroth.com/filter.
2)	Of the maximum set pressure

electrical

Type			DREBE6X
Power supply	Nominal voltage	V	24
	Lower limit value	V	21
	Upper limit value	V	40
Duty cycle		%	100
Protection class according to DIN EN 60529			IP65
Conformity			CE conformity according to EMC directive 2004/108/EC tested according to EN 61000-6-2 and EN 61000-6-3