4WE6X10-6X/EG24N9K4

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth 4WE6X10-6X/EG24N9K4 (R900922450) is a high-performance, solenoid-operated directional spool valve designed for controlling the start, stop, and direction of fluid flow within a hydraulic system. This particular model features two switching positions and is equipped with two high-power solenoids that facilitate the movement of the control spool to achieve the desired flow direction. The valve operates without spring return in its deenergized state, meaning it does not default to a basic position when power is removed. Built for robust performance, the valve includes a housing, electromagnets, control spool, and return springs (except version O). An auxiliary actuation option allows for manual operation without electrical power. It's important to note that proper venting of the hydraulic system is essential for optimal functioning of this valve. This specific variant of directional valves comes with porting patterns that adhere to ISO standards and can be selected with or without a locating hole. The solenoids on this model are optionally rotatable by 90 degrees and offer an electric connection as either single or central connection. Users can also benefit from optional spool position monitoring for enhanced control. The 4WE6X10-6X/EG24N9K4 valve is designed to comply with CE conformity according to the Low-Voltage Directive EU for electrical voltages greater than 50 VAC or 75 VDC. Additionally, it has an optional UL-approved solenoid coil marked UR according to UL508, edition 18, and an optional CSA approval according to C22.2 No. 0-M91. This product incorporates throttle inserts if required by operating conditions that exceed the performance limit of the valve during switching processes. Its design ensures energy-efficient operation by allowing detents to hold the control spool in place during use, reducing the need for continuous current supply to maintain position. However, users should be aware that pressure peaks might cause unintended movements in valves with detent and internal leakage may increase over time due to wear.