BALL RUNNER BLOCK CARBON STEEL KWD-025-FLS-C3-S-1

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth B.RUNNER BLOCK CS KWD-025-FLS-C3-S-1 (R16532312Z) is a high-precision ball runner block designed for use in linear guide systems. This product is part of the ball rail system range and offers exceptional performance characteristics, making it suitable for applications requiring the highest levels of precision and rigidity. The runner block body is constructed from unalloyed steel CS, ensuring durability and strength. This specific model boasts an FLS format, which denotes its flanged width, long length, and standard height dimensions. It operates with a high preload (class C) and falls into the super precision accuracy class (SP), ensuring minimal deviation during operation. Notably, this model does not include a ball chain but comes with initial lubrication and preservation to reduce maintenance needs. The dynamic characteristics of this ball runner block are enhanced by its design that allows for significantly reduced frictional oscillations and low friction force levels, especially when subjected to external loads. Its patented entry zone increases travel accuracy by up to six times compared to standard blocks. The unit is capable of long-term lubrication over several years due to its lube fittings with metal threads on all sides. For applications that require maximum system rigidity, this model features a pre-tensioned O-arrangement as well as additional mounting screw holes at the center for improved rigidity under lift-off and side loading conditions. The runner block can be used with all SN/SNO ball guide rails and supports high load ratings in all four main directions of loading. The B.RUNNER BLOCK CS KWD-025-FLS-C3-S-1 is pre-lubricated at the factory, has integrated all-around sealing for protection against contaminants, offers high torque load capacity, different preload classes, and allows for attachments to be mounted from both above and below the runner block. It also has the option for an integrated inductive measuring system for real-time position feedback without wear concerns.