This product is not available. CLICK HERE to create a support ticket for us to locate your part or a suitable replacement
| Rexroth connection dimensions |
| With seals |
| With left-hand version in some cases |
| Preload class: C0, C00, C1, C2, C3 |
| Tolerance grade: T3 (for sizes as per the product overview for screws, see general technical notes and information, “Product description”), T5, T7, T9 |
| With seals |
| Rexroth connecting dimensions: Rexroth mounting dimensions |
| Data Sheet | Download Data Sheet |
| 3D CAD | Download 3D CAD |
| 3D CAD | Download 3D CAD |
| Manual | Download Manual |
| Manual | Download Manual |
| Bearing temperature max | |
| Nut type | FEM-E-S single nut with flange |
| Series | Standard series |
| Bearing temperature min | |
| Productgroup ID | 17 |
| Nut or screw | Screw drive nut |
| Screw drive version (drive type) | Ball screw assembly |
| Maximum operating temperature | |
| Footnote dynamic load capacity C | The load capacities are valid for tolerance grade T3 and T5 only. For other tolerance grades, please take into account the correction factor fac (see General Technical Notes and Information "Technical Data", Technical Notes). |
| Bearing temperature | -15 °C ... +80 °C |
| Category | C |
| Minimum operating temperature | |
| Maximum permissible linear speed vmax | 30 |
| Operating temperature | -10 °C ... +80 °C |
| Direction of lead | Right |
| Lead | 20 |
| Footnote static load capacity C0 | The load capacities are valid for tolerance grade T3 and T5 only. For other tolerance grades, please take into account the correction factor fac (see General Technical Notes and Information "Technical Data", Technical Notes). |
| Hole pattern | BB5 |
| Static load rating C0 | 534200 |
| Footnote permissible operating temperature (min...max) | Ball screw assemblies permit operation at continuous temperatures of up to 80°C with temporary peaks of 100°C, measurements taken on the outer shell of the nut in each case. |
| Dynamic load capacity C | 315200 |
| Size L | 170 |
| Footnote operating temperature max. | Ball screw assemblies permit operation at continuous temperatures of up to 80°C with temporary peaks of 100°C, measurements taken on the outer shell of the nut in each case. |
| Footnote maximum permissible speed vmax | See “Characteristic speed d0 • n“ (section Technical notes) and “critical speed ncr“ (section Calculation and examples) |
| Nominal size | 80 x 20R x 12,7 - 6 |
| Weight | 11.600 |
$395.52 USD
$879.44 USD
$545.08 USD
$130.09 USD
$710.19 USD
Contact us below:
