This product is not available. CLICK HERE to create a support ticket for us to locate your part or a suitable replacement
| Lightweight precision housing (aluminum) |
| standard linear bushing |
| Secured by grooved taper pin |
| External seals |
| No lube port |
| Data Sheet | Download Data Sheet |
| 3D CAD | Download 3D CAD |
| 3D CAD | Download 3D CAD |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Size V | 6.5 |
| Series | Standard (metal) |
| Footnote friction force FR | Frictional drags generated by linear bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. |
| Size E1 | 28 |
| Footnote dynamic load capacity C | The load capacities apply for the main direction of loading. |
| Size H | 35 |
| Max. acceleration amax | 100 |
| Permissible ambient temperature | -10 °C ... +80 °C |
| Outer diameter D | 40 |
| Breakaway force | 19 |
| Size H4 | 26 |
| Maximum permissible linear speed vmax | 2.5 |
| Size D | 40 |
| Footnote static load capacity C0 | The load capacities apply for the main direction of loading. |
| Size N1 | 50 |
| Static load rating C0 | 1750 |
| Size M | 21 |
| Friction force | 7 |
| Size A | 75 |
| Radial clearance | Comes clamped to h5 shaft (lower limit) and set to zero-clearance |
| Productgroup ID | 17 |
| Size N2 | 18 |
| Size W | 12.5 |
| Size E3 | 42 |
| Permissible ambient temperature (max) | |
| Size E2 | 36 |
| Size E4 | 52 |
| Size SW | 3 |
| Permissible ambient temperature (min) | |
| Size S | 10.5 |
| Shaft diameter d | 25 |
| Linear guide type | Linear bushing and shaft |
| Filter for linear bushings and shafts | Linear sets with linear bushings |
| Format of linear bushings | SE – With side opening, adjustable |
| Dynamic load capacity C | 2270 |
| Size L | 67 |
| Size S2 | 8 |
| Weight | 0.82 |
| Size D1 with tolerance | |
| Size H1 | 72 |
$120.96 USD
$114.96 USD
$153.47 USD
$1,385.75 USD
$80.50 USD
Contact us below:
