SOLID SHAFT WV-30H6-CR

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth SOLID SHAFT (R100003060) is a high-precision component designed for linear motion applications. This solid shaft is crafted from heat-treated steel and features a hard chrome plating on its outer diameter, which provides excellent corrosion protection and enhances the durability of the shaft. The hard chrome layer has a thickness of approximately 20 µm with a hardness of around 900 HV, ensuring the shaft can withstand demanding conditions. With a shaft diameter tolerance classified as h6, this model offers precise fitment for linear bushings and ensures smooth movement in linear guide systems. Its surface roughness is finely controlled at RA 0.3 µm, contributing to reduced friction and wear over time. The depth of hardness of the chrome plating extends to a minimum of 0.55 mm, providing additional structural integrity. The Bosch Rexroth SOLID SHAFT boasts an impressive straightness tolerance of up to 5 µm for lengths under 1 meter as per ISO standards, guaranteeing high accuracy in applications where straightness is critical. For longer lengths, sections can be combined seamlessly, allowing linear bushings to roll over joints without interruption. This model's cylindricity and roundness tolerances are denoted as t, ensuring uniformity and consistency along the length of the shaft. With a mass of 2.57 kg/m, it balances strength with manageability for effective use in various configurations. Designed specifically for use with precision steel shafts and linear bushing systems, this Bosch Rexroth product stands out for its robust construction, precision engineering, and exceptional surface treatment—qualities that make it suitable for sophisticated mechanical setups requiring high-precision linear motion control.