ELT TRANSVERSE CONVEYOR EQ 2/TE LS

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth ELT TRANSVERSE CON EQ 2/TE LS (3842999039) is a preassembled module designed for branching off into a transverse section in conveyor systems. This particular model is equipped with two lifting cylinders per lift transverse unit and utilizes a toothed belt as its conveyor medium. The system is engineered to be compatible with ST or ST H sections, supporting profiles of varying widths, and offers reversible operation to enhance flexibility in handling directions. However, it does not support accumulation operation on the lift transverse units. The ELT TRANSVERSE CON EQ 2/TE LS has a maximum length (L max) and minimum length (L min) specification, ensuring adaptability to different system sizes. It is also designed to accommodate a specific section load during accumulation operation and can handle workpiece pallets with a total weight (mG) up to the defined limit. Notably, this model is ESD safe, making it suitable for handling sensitive electronic components. For pneumatic control, the module requires both a maximum and minimum compressed air connection (pmax and pmin), ensuring precise operation of the lifting units. The weight of the unit is specified, allowing for proper planning regarding system load capacities. Included in the scope of delivery are one lift transverse unit HQ O, one belt section BS TE, one connection kit, housing elements SK B, pneumatic equipment for two or three positions, and an assembly kit for electrical position inquiry. The lift transverse unit HQ O and belt section BS TE come assembled while the protective housing arrives unassembled. To optimize functionality, dampers such as DA 1 are recommended accessories for outfeeding workpiece pallets at specific velocities. Additionally, rockers WI , WIM along with dampers DA 1 , DA C are suggested for infeeding pallets into BG sections. For accurate position inquiries at each top/bottom position, required accessories include Mx sensors with a rated sensing range S. The Bosch Rexroth ELT TRANSVERSE CON EQ 2/TE LS is thus an integral component designed for efficient directional control within complex conveyor systems where precision and adaptability are paramount.